Suburban furnace exhaust vents may appear similar from outside the RV, but the correct assembly is determined by the complete furnace model and its matching exhaust installation. The 260553, 260572 and 260573 are identified with different furnace families. Part 260231 is also an exhaust-tube-and-cap assembly, but its exact application must be checked in the furnace parts documentation.

Identify the Suburban furnace family

SF / SH furnace

260553 is listed for selected SF- and SH-series exhaust configurations and includes a rain-shielded stainless terminal. Confirm the specific furnace cabinet and exhaust arrangement.

NT-16 / NT-20 variants

260572 is listed for specific NT-16 and NT-20 S, SE, SEQ and SQ models. Its current product listing includes the rain-shielded terminal and mounting hardware.

NT-24SP / NT-30SP / NT-34SP

260573 is listed for these NT-SP model variants, not automatically for all NT-series furnaces. Compare the precise exhaust assembly.

Never choose a furnace exhaust by outside appearance alone. Different terminal lengths, intake/exhaust configurations and model-specific seals affect combustion safety. Do not substitute another vent or modify combustion piping to make a part fit.

Where the exhaust assembly sits

Original conceptual layout only. It is not an installation diagram or a representation of intake/exhaust tubing for a particular furnace.

Compare the four Suburban exhaust parts

MPN Listed application Assembly Included hardware
260231 Select Suburban furnace models 6-inch exhaust tube and vent cap Mounting hardware not included
260553 SF and SH series Stainless exhaust vent with rain shield Mounting hardware not included
260572 Selected NT-16 and NT-20 models Exhaust vent with rain shield Vent cap and mounting hardware listed
260573 NT-24SP, NT-30SP and NT-34SP Stainless exhaust vent and cap Mounting hardware not included

260231: The catalog specifies a 6-inch, 2-inch-diameter exhaust tube with cap for selected Suburban applications, but does not establish an exact list of compatible furnace models. Match the original stock number before ordering.

260553: The listing specifies a stainless-steel vent with rain shield for SF/SH models, 5⅞-inch length and 2-inch pipe diameter. The series name alone does not establish every model/version fit.

260572: A vent-and-cap assembly with rain shield for the identified NT-16 and NT-20 variants. Confirm the full suffix; its included mounting hardware differs from some other listed vent kits.

260573: The listing identifies the NT-24SP, NT-30SP and NT-34SP applications and an 8-inch overall vent dimension. It should not be treated as interchangeable with 260572 without a manufacturer parts-list confirmation.

Checklist before repairing furnace venting

  1. Find the furnace data plate. Record the exact model, including suffix, and serial information.
  2. Identify the original vent part. Use the correct factory exploded parts drawing to verify the exhaust terminal stock number, length and mounting arrangement.
  3. Inspect the complete assembly. Check approved combustion intake, exhaust connection, seals, exterior cap and surrounding wall for damage.
  4. Use appropriate service procedures. Furnace exhaust replacement is combustion-safety work. Follow the manufacturer's instructions and have a qualified RV gas-appliance technician complete the work as appropriate.

Shop matching furnace exhaust assemblies

Frequently asked questions

Can 260572 replace a 260573 furnace exhaust vent?

No interchangeability is established. The parts are listed for different NT furnace groups. Match your full model and the exact manufacturer's parts reference.

Is 260553 correct for every Suburban SF furnace?

The current catalog identifies it with SF/SH furnace families. Confirm the exact model and manufacturer's selected vent assembly before treating it as a fit.

Does 260231 include a cap?

Yes, its current product listing describes an exhaust tube with vent cap. Mounting hardware is not listed as included.

Is the exhaust vent the same as an interior furnace duct?

No. The combustion exhaust terminal is separate from the heated-air supply and return duct system inside the RV. Use only manufacturer-approved combustion vent parts.

Related Suburban furnace diagrams

Confirm that the exact model-specific parts pages contain the referenced number before assuming a match. Viewing and pickup of used inventory in Kelowna are by appointment.

Quick part links: 260231 · 260553 · 260572 · 260573

Recently viewed

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

RV Parts Newsletter

Sign up for upcoming promotions!