Red Line 58104 Synthetic SAE 80W-140 Gear Oil, 1 Qt

Commercial hauling and high torque at low speeds are among the range’s 80W140 applications. This quart contains synthetic SAE 80W-140 oil for the listed limited-slip differentials and manual transmissions.

Product details

Red Line gear oils combine cold-flow characteristics with hot gear protection. The range offers differential temperature reductions of 10 to 70 degrees Fahrenheit and typical efficiency gains of 1 to 5 percent. Stable synthetic base stocks maintain film strength, carry higher loads than petroleum lubricants and permit extended use. In the range, 75W90 serves conventional and limited-slip differentials in street and racing use; 75W90NS and 75W140NS can increase lockup in certain racing limited-slip units. The 80W140 grade addresses commercial hauling, problem limited-slip units, high torque at low racing speeds and noise reduction. Lightweight and SuperLight favor power transfer where racing differential temperatures are not extreme. Limited Slip Friction Modifier reduces stick-slip chatter, but excess can reduce lockup, so add it only when needed. The 75W90, 75W140 and 80W140 grades already contain modifier, although some units need more.

Features and warranty

• Fully Synthetic Formulas Created From Polyol Ester Base Stocks, Offer Excellent Lubrication Under Extreme Conditions
• High Viscosity Index (VI) To Provide Relatively Constant Viscosity And Film Thickness With Varying Temperature Change
• Ester Base Stocks And Friction Modifiers Provide Additional Slipperiness To Lower Operating Temperatures By Reducing The Sliding Friction In Hypoid Gears
• Superior Shear Stability And Reduced Oxidation Compared To Other Synthetics And Conventional Gear Oils
• Exceed API GL5 Specifications
• Engineered To Provide The Highest Degree Of Protection And Improvement Of Differential Efficiency For Better Mileage, Longer Drain Intervals, And Less Wear
• Contains Additional Friction Modifiers For Suitability With Clutch Type Limited Slip Differentials For Most LSDs, No Additional Friction Modifiers Are Required
• No Supplier Warranty

Specifications