Intellitec 00-00629-120 Battery Isolator Relay Delay - 12 Volts

Intellitec 00-00629-120 is the 12V Isolator Relay Delay/E controller. It waits for the engine alternator to raise chassis battery voltage before engaging a compatible auxiliary-battery isolator relay. This is a single-direction charging-delay controller, not the Diesel-2 bi-directional 00-00839-000 model. Verify 12V application and the continuous-duty relay wiring before installation.

Specifications

Key Features

• Isolator Relay Delay/E provides a controlled delay before charging an auxiliary battery from the chassis alternator.
• Unlike diode isolators, this system provides an engine driven alternator with the opportunity to begin charging the main battery before connecting the auxiliary battery.
• Allows the Use of Self-Exciting Alternators and Lets the Engine Briefly Warm Up Prior to Placing the Load of a Heavily Discharged Auxiliary Battery on the Alternator.
• Fully Encapsulated in a Plastic Enclosure for Mounting in the Engine Compartment with Two Screws.
• Operates in Combination with a Conventional Continuous Duty Cycle Isolator Relay That Has Been Used by a Number of Vehicle Manufacturers.
• Limited 90 Day Warranty.
• The unit is available in both 12 and 24 Volt versions.
• It operates by sensing the voltage on the main 12 Volt system.
• When this voltage goes above 13.3 Volts for approximately 12 seconds, as happens when the engine is running normally (normal alternator output voltage is approximately 14.4 Volts), it will close the isolator relay providing charging current to the auxiliary battery.

Compatibility