
Suburban 525024 — Airflow sail switch
Factory schedule includes SF-42 / SF-42F units below serial 924201894. Other applications depend on complete model and production number.
View exact partA furnace sail switch confirms that the blower is moving enough air for the ignition sequence to proceed. Suburban uses several different low-airflow switches across its NT, SF, SFV and SH furnace families. Similar paddles or mounting tabs do not establish interchangeability. Find the complete furnace model, serial number and original switch number before selecting a replacement.
525024 is listed for particular NT-30/34, P-30S and older SF models. For SF-42 and SF-42F, the factory parts list specifies a serial-number boundary; do not choose solely by the SF-42 name.
525003 appears in later SF/SFV/SH service references. Check the original switch, full model and production serial before assuming it replaces an earlier unit.
Functional explanation only; not a wiring or service bypass diagram. An obstruction, weak motor, low supply voltage or damaged paddle can prevent the switch from operating correctly.
| MPN | Component | Furnace family | Important selection detail |
|---|---|---|---|
| 525024 | Airflow sail switch | NT-30/34, selected older SF and P-30S | Factory schedule includes SF-42 / SF-42F units below serial 924201894. Other applications depend on complete model and production number. |
| 525003 | Airflow sail switch | Selected later SF/SFV/SH models | Listed for a range of newer SF, SFV and SH furnaces. For SF-42 / SF-42F, compare the factory serial boundary and existing switch. |
| 525028 | Airflow sail switch | NT-12/16/20 S and SE; NT-16/20 SQ and SEQ | Factory references assign this number to selected NT small-furnace variants; the full S/SE/SQ/SEQ suffix matters. |
| 233355 | Airflow sail switch | NT-40 | Identified for the NT-40 furnace; do not substitute by the appearance of a nearby NT-series switch. |
| 233383 | Airflow sail switch | SH-35, SH-35F and P-40S | Factory references identify these particular models. Broader P-40 variants in catalog text have not been established as equivalent. |
| 062476 | Mounting bracket only | NT-16SE and NT-20SE | A bracket for positioning the matching airflow switch. The switch is not included. |
062476 is a mounting bracket for specified NT-16SE and NT-20SE furnaces. It provides the correct position for the separate low-airflow switch and does not include the switch. A bent or missing bracket can interfere with proper paddle position even when the switch itself works.
A furnace that blows air but fails to ignite does not automatically need a sail switch. Confirm adequate supply voltage, unobstructed ducts and return air, correct blower operation and the manufacturer-specified safety-control sequence. The sail switch, high-temperature limit, ignition board and gas supply all serve different functions.
Never bypass or permanently bridge an airflow or temperature safety device. Turn off propane and electrical power before service and follow the exact Suburban service instructions. A qualified RV technician should perform gas and ignition-system repairs.
Each card links to the matching UsedRVParts catalog listing and uses its existing product image. Match the factory part number, paddle arrangement, bracket and complete furnace data before ordering.

Factory schedule includes SF-42 / SF-42F units below serial 924201894. Other applications depend on complete model and production number.
View exact part
Listed for a range of newer SF, SFV and SH furnaces. For SF-42 / SF-42F, compare the factory serial boundary and existing switch.
View exact part
Factory references assign this number to selected NT small-furnace variants; the full S/SE/SQ/SEQ suffix matters.
View exact part
Identified for the NT-40 furnace; do not substitute by the appearance of a nearby NT-series switch.
View exact part
Factory references identify these particular models. Broader P-40 variants in catalog text have not been established as equivalent.
View exact part
A bracket for positioning the matching airflow switch. The switch is not included.
View exact partNot universally. Production, model suffix and serial-number differences matter. Use the original factory parts schedule and switch assignment for the exact furnace.
Not according to these manufacturer assignments. NT-40 is listed with 233355, while certain NT-12/16/20 models use 525028.
No. It is a switch mounting bracket for the listed NT-16SE and NT-20SE applications.
No. Restricted airflow, inadequate blower speed or an obstructed or improperly mounted paddle can prevent correct operation.
No. This is part of the furnace safety system and must not be bypassed. Use the model-specific diagnostic procedure.
Final part selection and any gas-system repairs should follow the original manufacturer documentation for the exact furnace. Eligible UsedRVParts products can be viewed or picked up by appointment in Kelowna.
Quick MPN links: 525024 · 525003 · 525028 · 233355 · 233383 · 062476
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products