
Lewmar 66840008
Fixed Delta-type · 14, 22 or 35 lb Delta/DTX
Fixed bow-roller arrangement listed by Lewmar for Delta and DTX anchors weighing 14, 22 or 35 pounds.
A bow roller guides an anchor and chain over the boat's bow and helps support the anchor while stowed. Lewmar's 66840008 and 66840085 are both 304 stainless-steel assemblies, but they have different mounting geometry and anchor-weight ranges. One uses a fixed Delta-style arrangement; the other pivots. The right replacement must fit the anchor profile, bow structure and mounting area.
The manufacturer lists each assembly as a different model and anchor range. These measurements are provided using the original manufacturer's dimension letters, so customers can align them with its drawing rather than comparing unlike values.
| MPN | Style | Listed anchor weights | Assembly weight | Catalog dimensions | Product |
|---|---|---|---|---|---|
| 66840008 | Fixed Delta-type | 14, 22 or 35 lb Delta/DTX | 9 lb | A 19½ in; B 14 13/16 in; H 23 11/16 in | View |
| 66840085 | Pivoting | 22, 35 or 45 lb Delta/DTX | 11 lb | B 15¾ in; H 22 11/16 in | View |

Fixed Delta-type · 14, 22 or 35 lb Delta/DTX
Fixed bow-roller arrangement listed by Lewmar for Delta and DTX anchors weighing 14, 22 or 35 pounds.

Pivoting · 22, 35 or 45 lb Delta/DTX
Pivoting bow-roller arrangement listed by Lewmar for the 22-, 35- and 45-pound Delta/DTX anchor range.
No direct interchange is established. The former is a pivoting roller with a different recommended anchor range and mounting geometry; compare the entire bow arrangement and current Lewmar dimensions.
Lewmar identifies 23 11/16 inches as its H dimension. The same manufacturer chart also lists separate A and B measurements. Use the drawing's labelled dimensions when measuring the actual mounting footprint.
The manufacturer's suggested ranges overlap at 35 pounds, but anchor weight alone cannot establish fit. Confirm shank shape, roller clearances, bow hardware, mounting details and stowage geometry.
No. The roller guides and stows the anchor, while anchoring loads should be carried by an appropriate cleat or chain stopper. A windlass also should not be the sole point holding the boat at anchor.
Before installation, compare the Lewmar catalog dimension drawing against the boat's bow structure, secure backing and mounting hardware. Inspect roller pins and anchor restraints before cruising.
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products