Kwikee-powered RV entry steps rely on a matching door-position switch to tell the controller when the entry door opens or closes. Some systems use a magnetic sensor and magnet; others use a plunger pressed by the door. The four listed replacements differ in their construction and mounting. Identify your original switch, controller and step generation before ordering.

Magnetic or mechanical plunger?

Magnetic: 379400

A door-frame sensor with two leads and a screw-mounted housing, activated by the corresponding magnet. Confirm the controller and original sensor before using this number.

View 379400

Magnetic: 379406

A separately numbered magnetic door switch. Similar function does not establish identical mounting, contact logic or compatibility with 379400.

View 379406

Plunger: 379388

Mechanical switch that responds to pressure from the door or frame. Its listing excludes a wiring harness; match the installed actuating point.

View 379388

Pleated plunger: 379407

Mechanical plunger with a pleated body and two blade connections. Verify the original part, electrical connection and available travel.

View 379407

How the switch identifies door position

Functional identification illustration only; not an electrical wiring schematic, terminal pinout or statement that these types can be exchanged.

Important: A door switch can have different normally-open or normally-closed logic depending on its model and controller. The available product listings do not verify those contact states for every number here, so do not substitute one based solely on having two wires or similar dimensions. Verify Lippert's exact service documentation.

Lippert Kwikee door-switch MPN comparison

MPN Switch construction Identification notes
379388 Mechanical plunger A switch activated by a door or frame pressing its plunger. The product listing does not include a wiring harness.
379400 Magnetic sensor A two-lead sensor mounted with two screws in the door frame, used with a corresponding magnet and compatible step controller.
379406 Magnetic sensor A separately numbered magnetic door switch. Match the original switch's shape, mounting and controller requirements; not proven interchangeable with 379400.
379407 Mechanical plunger A pleated plunger-style switch with two blade-type terminals; requires matching door clearance, mounting and connection.

What to check before replacing a switch

  1. Identify the entry-step assembly. Record the Kwikee series, production generation, motor/gear arrangement and controller part number.
  2. Inspect the original switch and door. Check magnetic versus plunger operation, housing, mounting holes, door magnet and wiring or blade terminals.
  3. Confirm contact logic from the factory instructions. A switch that fits physically can still send the wrong signal to a different controller.
  4. Follow safe step-service procedures. Isolate step power before servicing, secure the moving mechanism and keep hands and tools clear of the travel path during testing.

If a step does not extend or retract, the door switch is only one possible cause. The controller, motor/gearbox, wiring, fuse and linkage can also affect operation. Identify the fault rather than replacing unrelated components.

Shop matching Kwikee entry-door switches

Common questions

Are 379400 and 379406 interchangeable magnetic switches?

No interchangeability has been established here. They are separate Lippert manufacturer numbers and must be matched against the original installation and controller.

Can a magnetic door switch replace a plunger switch?

Not as a general substitution. It requires the correct magnetic actuation, controller logic and mounting arrangement. Match the factory system.

Does 379388 include wiring?

The corresponding catalog listing states that a wiring harness is not included. Verify the existing wiring and terminals before ordering.

What makes 379407 different from a standard plunger switch?

The current product listing identifies a pleated plunger construction with two blade-style connections. Compare the complete original part, not just the plunger mechanism.

Related Kwikee repair reference

Kwikee electric entry-step parts, motors, gear linkages and controls — use the step series identification and existing diagrams to narrow down the original assembly.

Viewing and pickup of eligible locally held parts at UsedRVParts in Kelowna is by appointment. Confirm individual product availability and fulfilment details before visiting.

Quick product links: 379388 · 379400 · 379406 · 379407

Recently viewed

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

RV Parts Newsletter

Sign up for upcoming promotions!