JR Products 12075
Standard white momentary slide-room switch assembly, with the preprinted panel.
Identify JR Products RV Slide-Out Switches & Harnesses
If the original RV slide-out switch is missing or damaged, check the terminal arrangement before replacing it. JR Products makes several 12-volt momentary switches with the same black or white finish but different panel cutouts, bezels and four- or five-terminal connections. The harness must also be matched to the existing motor circuit.
Identify the switch and connector style
The switch part numbers differ by bezel, finish, panel size or terminal arrangement. Harness rows describe separate components and should not be treated as complete switches.
| MPN | Component | Colour | Terminal style | Mounting cutout |
|---|---|---|---|---|
| 12075 | Switch with labelled bezel | White | 5 terminals | 1.85 × 1.20 in |
| 12095 | High-current switch only | White | 5 terminals | 1.85 × 1.20 in |
| 12285 | Switch with labelled bezel | Black | 5 terminals | 1.85 × 1.20 in |
| 12295 | High-current switch only | Black | 5 terminals | 1.85 × 1.20 in |
| 12345 | Low-profile switch with plate | White | 5 terminals | 1.67 × 0.95 in |
| 12355 | Low-profile switch with plate | Black | 5 terminals | 1.67 × 0.95 in |
| 12385 | Four-terminal motor switch | White | 4 terminals | 1.85 × 1.20 in |
| 12395 | Four-terminal motor switch | Black | 4 terminals | 1.85 × 1.20 in |
| 13065 | Double-row-terminal harness | Wiring | 5-wire adaptation | Not applicable |
| 13975 | Slide-out wiring harness | Wiring | 4-wire harness | Not applicable |
Important: four- and five-terminal versions are not automatically interchangeable. The eight listed slide-room switches are rated 40A at 12V DC with momentary-on/off/momentary-on operation. The 13065 adapts certain five-pin straight-row connections to double-row terminals; the 13975 is a separate harness for a four-terminal family. Compare the original connector and wiring diagram before combining parts.
Inspect the original before replacement
- Read the original MPN: note whether the old switch has a five-terminal double row or a four-terminal connector.
- Measure the panel opening: standard 12075/12095/12285/12295 and four-pin versions use a 1.85 × 1.20-inch cutout; low-profile 12345/12355 use 1.67 × 0.95 inches.
- Check whether the panel is included: 12075/12285 have Slide Room labelled bezels. The 12095/12295 are switch-only versions.
- Verify the harness: the 13065 is for appropriate double-row-terminal conversions; 13975 belongs to a distinct four-wire arrangement. Confirm the exact connection before installing either.
- Isolate electrical power: follow the RV slide-out wiring diagram. A motor or controller fault will not be corrected by fitting a different-looking switch.
Switch dimensions: JR lists the low-profile 12345/12355 switch face at 2.87 × 1.87 inches. The published 1.67 × 0.95 inches refers to the required cutout, not the overall faceplate size.
Exact catalog product listings
These links open the exact UsedRVParts catalog products. Check each item's stated condition and availability; viewing or pickup in Kelowna is by appointment.
JR Products 12095
White switch without a panel; check the original bezel and double-row terminal arrangement.
JR Products 12285
Black counterpart of the standard slide-room labelled switch assembly.
JR Products 12295
Black switch without a bezel, listed for the high-current slide-out circuit.
JR Products 12345
Low-profile white Slide Room panel, with a 2.87 × 1.87-inch overall switch face.
JR Products 12355
Low-profile black version with the smaller cutout; verify its harness and terminal layout.
JR Products 12385
White 4-pin motor control; not a plug-for-plug substitute for five-terminal models.
JR Products 12395
Black 4-pin motor control; keep the original connector and motor wiring arrangement in mind.
JR Products 13065
12V, 40A harness used when adapting an appropriate five-pin straight-row switch to double-row terminals.
JR Products 13975
Separate four-wire connection harness; check its connector and pinout against the exact switch.
Related RV electrical references
For examples of the separate motor and actuator systems these controls may operate, see the Lippert through-frame slide-out parts reference. Match the switch to the existing control circuit rather than assuming a Lippert mechanism requires one specific JR switch. Need a lighting control instead? See the JR dimmer identification guide.
Recently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products