The GP-IC-2000 and GP-IC-3000 use an original GP-ICR-50 remote and a separate battery temperature sensor. If a remote display or sensor is missing, identify the specific inverter model and the marked ports before selecting a replacement. Other Go Power screens are not automatically interchangeable.
Follow the REMOTE and BATTERY TEMP sockets
The remote's data cable and the battery temperature sensor have different purposes and ports. The temperature lead is not an inverter power cable, while the remote does not replace battery sensing.
Remote monitoring
Battery temperature sensing
Check the remote before purchasing a replacement
| Component / control | Purpose and identification |
|---|---|
| Status display | Four-line GP-ICR-50 display used to view the IC inverter/charger status and settings |
| SELECT and navigation | Navigate the original IC-series monitor and charging menu pages |
| Inverter/charger operation | Displays inverter, charging and AC source status from the original IC unit |
| Remote cable | The complete IC remote reference includes a 50-foot cable, not an RV-C PowerTrak harness |
| Battery temperature port | Dedicated BATTERY TEMP connector on the inverter/charger; not the remote-control socket |
| Battery temperature probe | Senses at the battery-negative terminal for supported charge-voltage compensation |
| GP-IC controller family | A 2000W or 3000W original GP-IC-12 inverter/charger, not the newer AIC-series controller |
Go Power's original IC-series remote has a four-line screen and control navigation for inverter/charger setup. For battery chemistry and charging adjustments, follow the exact IC manual rather than copying settings from an AIC or other Go Power controller.
Check IC-series package and cable photographs
These links are useful for identifying an IC unit or its battery cable system. Do not order a complete kit if you only need a separate control accessory without verifying its availability.
Go Power original remote and battery sensor documentation
The manufacturer's IC unit-features illustration identifies the REMOTE and BATTERY TEMP sockets. The IC-series installation instructions explain where the battery probe is placed and how to set up the dedicated original remote.
IC-series unit features and port labels · Go Power GP-ICR-50 remote reference · Original IC-series inverter/charger manual and specs