Before replacing a Go Power screen, check whether your RV has a complete PowerTrak RV-C monitoring network or just an older wired remote. The 83457 screen and the 84025 display kit share the GP-PT-DIS-3 display, but the kit includes cabling and termination parts that the screen alone does not.
How PowerTrak pieces fit together
The display collects data from compatible RV-C devices. An AIC inverter/charger can report operation, an RV-C solar controller can report charging, and a compatible battery interface provides battery information. Matching the communication system matters as much as the screen size.
Which monitor package should you select?
When an existing display stops working, a screen-only replacement may avoid buying the cable kit again—but first confirm the original harness, terminator, supply voltage and exact display. For a new installation, the 84025 bundle supplies the display and basic network extension.
| Part / MPN | Package contents | Best use |
|---|---|---|
| GP-BMK-25 / 82958 | Dedicated standalone monitor with its own shunt and separate wired display | Independent battery monitor, not an RV-C PowerTrak component |
| GP-SHUNT-500 | PowerTrak RV-C smart shunt; separate accessory not included with either screen | Battery state-of-charge reporting for AGM, flooded and other non-Advanced-Lithium batteries |
| GP-PT-DIS-3 / 83457 | 3.2-inch touchscreen only; RV-C harness and terminator not included | Replacing a screen or adding a display to a properly wired network |
| GP-PT-DIS-KIT / 84025 | GP-PT-DIS-3 touchscreen; GP-RVC-EXT-25 25-ft RV-C harness; GP-RVC-PT-TR terminator; display connectivity cables | Starting a new PowerTrak display installation |
Display size and mounting
Both display packages use a 3.2-inch 320 × 240 colour touchscreen. Go Power specifies a display bezel measuring 4.75 × 2.75 × 0.75 inches and a panel cutout of 4.375 × 2.375 inches. The display runs from a compatible 12–48V RV-C network, with Bluetooth access through the Go Power Connect app.
Battery monitoring: which information is available?
Go Power Advanced Lithium batteries provide battery data over their supported communication harness. For AGM, flooded, gel or other lithium systems, PowerTrak needs an appropriate GP-SHUNT-500 battery monitoring interface for state-of-charge readings. A PowerTrak screen alone cannot measure battery current just by being installed.
The older GP-BMK-25 (82958) is a separate monitor with its own display and 500A/50mV shunt. It is not an adapter for displaying battery information on PowerTrak.
Photo cards for matching model numbers
PowerTrak touchscreen choices
Other equipment in the reference
Original Go Power documentation
Go Power's manufacturer reference page provides the display and network specifications, with product documentation available there. Use those drawings to select the actual branch and termination harnesses for your RV.
PowerTrak display kit specifications and manufacturer documents