Not sure which Go Power RV transfer switch you have? The model label matters more than the enclosure colour. The TS-30 and prewired GP-TS are 30-amp, 120-volt models; the TS-50M (70278) is a 50-amp double-pole switch for 120/240-volt service. This guide compares them without treating the models as interchangeable.
How the two power-source arrangements differ
A transfer switch selects between two AC supply sources. The diagrams below show the role of the inputs and the RV distribution panel. They are identification aids, not terminal wiring diagrams.
30A / 120V: TS-30 or GP-TS
50A / 120–240V: TS-50M
Exact model comparison
Look for the manufacturer part number 64403 on the TS-30 or 70278 on the TS-50M. The separate GP-TS version has an inverter connection cord and a converter receptacle. Although it is prewired, it is still a 30A, 120V product—not a 50A or 120/240V substitute.
| Model / part no. | Rated AC service | Configuration | Dimensions (L × W × H) |
|---|---|---|---|
| TS-30 / 64403 | 30 A; 120 V AC, one leg | Hardwired two-input switch | 9.65 × 7.28 × 4.75 in |
| GP-TS / GP-TS | 30 A; 120 V AC, one leg | Prewired transfer switch | 9.65 × 7.28 × 4.75 in |
| TS-50M / 70278 | 50 A; 120/240 V AC, two legs | Double-pole transfer switch | 9.4 × 7 × 4.4 in |
Key differences inside the units
TS-30: A 30A relay, source-selection controls and hardwired AC connections inside the enclosure. GP-TS: The same 30A electrical service class with an attached inverter connection and converter-only-when-shore-powered receptacle. TS-50M: A double-pole switching arrangement for two 120V legs, with the source terminal groups shown in the original factory drawing.
These switches provide source transfer and back-feed isolation as designed. They should not be described as solar-to-battery transfer devices or treated as surge-protection units without an exact manufacturer specification.
Photographs of matching Go Power models
These catalog images link to the corresponding exact-model listings. Compare the label and service rating with the equipment already installed.
Already using an inverter with an internal transfer switch?
Go Power's ASW-3000-12-TS (83829) 3,000W inverter includes its own 30A transfer function. It is shown as a different system choice, not as a replacement ATS and not as a guaranteed fit for an existing installation.
Original manufacturer drawings and service manuals
The Go Power manuals include the real relay and terminal drawings. Use these documents with the model label and current instructions; the simplified illustrations above intentionally omit electrical terminals and conductor routing.