An Atwood or Hydro Flame furnace may have a failed electric blower motor, a damaged circulating-air blower wheel or a separate combustion-air wheel. Those parts are not interchangeable. Atwood's 7900-II, 8500, 8900 and AFMD furnace families use different hardware and, in some cases, different electrical supply requirements. Use the exact furnace model and original component number to identify a repair part.
Identify the correct blower component
7900-II series
31384 is listed as a furnace motor for designated 7912-II, 7916-II and 7920-II models. The similar M.C. Enterprises 31384MC is a separately listed aftermarket part; verify the precise substitution before selecting it.
8500 and 89-series
37698MC is an aftermarket 12V motor for selected furnaces, whereas 30132 is listed for specified AC-designated 89-series models. 33126 and 34099 are blower wheels, not motors.
AFMD35 / DFMD35
30720 is a dual-shaft 12V motor currently listed for selected AFMD35 and DFMD35 furnace versions. Check the complete five-digit model designation and original equipment reference.
Important: A 12V DC motor is not a replacement for an AC-designated furnace motor. Motor shaft length, diameter, electrical load, rotational direction and blower-wheel positioning must agree with the exact furnace drawing. Do not select by BTU rating alone.
Motor versus wheel: what you are replacing
Cabin-air blower wheelMoves heated cabin air through approved ducting
↔
Furnace motorElectrical drive and model-specific shafts
↔
Combustion-air componentSeparate air path for burner system
Original functional schematic only; not an exploded diagram or installation diagram for any particular furnace model. Many furnaces use two wheels on a shared motor shaft, but exact layouts differ.
Read the complete furnace model and revision. A 8535-III is not automatically the same installation as an 8535-IV, and a DC-designated 89-series model is not an AC variant.
Identify the failed component. A noisy blower may be caused by the wheel, bearings, motor or another issue. Do not infer the part from the symptom alone.
Match the exact part reference and physical assembly. Confirm shaft configuration, fan-wheel dimensions, clamp position, wiring connections and any documented part-number changes.
Use safe manufacturer service procedures. Shut down power and LP gas and follow the precise furnace repair instructions. Combustion-air or gas-related work should be handled by a qualified RV furnace technician.
Motor. Selected AFMD35111 through AFMD35151 and DFMD35 variants (catalog-listed).
OEM-listed 12V dual-shaft motor; the catalog identifies 30607 as an earlier reference. Shaft dimensions, current draw and exact furnace revision must match.
Air-moving wheel with clamp, listed as a replacement for wheel 37764. Not an electric motor; verify shaft diameter, wheel orientation and original part.
Are 31384 and 30720 interchangeable furnace motors?
Not on the available identification. The catalog associates them with different furnace model families. Check the factory parts list for the exact appliance.
Can I use an AC-designated 30132 motor in a 12V DC furnace?
No such application is documented. The electrical system and motor specification must match the furnace; do not adapt one to the other.
Does a 33126 blower wheel include the electric motor?
No. The listing identifies the blower wheel and clamp, not a motor or complete blower-drive assembly.
Is 34099 the same as 33126?
No interchange is established. They are separately listed blower wheels for different Atwood furnace families; confirm size, orientation and original reference.
Can I inspect an Atwood replacement part in Kelowna?
UsedRVParts offers viewing and pickup by appointment for eligible locally available items. Check the individual listing and arrange a visit first.
Manufacturer parts lists and the data plate on the installed furnace govern the final choice. This page is for component identification, not a repair or conversion procedure.
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.