Valterra RV Holding-Tank Wands: Spinning, Flexible & Clog-Clearing

Rinsing an RV holding tank is easier when the cleaning wand matches the route through the toilet and the type of waste you are trying to remove. Valterra makes several distinct tools: a 30-inch spinning spray wand, a 40-inch flexible multi-jet wand, and a 60-inch downward-jet clog tool. A separate hose kit connects a compatible wand to a suitable faucet. These parts are designed for different jobs, so length alone is not the deciding factor.

Which Valterra tank-cleaning tool should you choose?

Compare the wands and hose kit

A01-0185VP — Spinning Master Blaster wand

The rigid 30-inch wand uses a rotating spray nozzle that directs water outward and downward across the tank interior. Its quick shutoff is useful when positioning the wand.

View Valterra A01-0185VP

A01-0187VP — Flexible tank wand

The flexible 40-inch shaft can follow a bend beneath the toilet. Its multi-jet nozzle distributes rinse water around tank surfaces and sensor areas.

View Valterra A01-0187VP

A01-0190PB — Clog Killer tank wand

This 60-inch firm, flexible wand uses a strong downward-directed jet for working on holding-tank and toilet waste clogs. It has a shutoff at the wand.

View Valterra A01-0190PB

A01-0189VP — Tank wand faucet hose kit

This separate kit contains a 6-foot, ½-inch hose and a faucet-to-hose adapter. It provides a water connection for a tank wand; the wand itself is not included.

View Valterra A01-0189VP

Spinning, multi-jet and downward-jet nozzles explained

The spinning nozzle on Valterra A01-0185VP sprays outward and downward, making it useful for rinsing accessible surfaces in a tank beneath a suitable toilet opening. The multi-jet nozzle on A01-0187VP works with a flexible shaft that can navigate a bend below an offset toilet. The downward jet on A01-0190PB concentrates the flow in one direction to help break up waste obstructions. None of these is a universal solution for every blockage or tank layout.

Where the faucet hose kit fits

Valterra A01-0189VP supplies the water connection, not a cleaning nozzle. Its 6-foot, ½-inch hose and faucet adapter can connect a suitable tank wand to a compatible bathroom faucet. Valterra also describes using hot water for cleaning when the connected plumbing and equipment permit it. Check the faucet adapter and available hose reach before ordering.

Before you rinse the holding tank

1. Empty the tank first. Keep the waste outlet connected to an approved dump point while preparing the rinse.
2. Confirm the toilet access. Use the straight wand only where the opening and path allow it; a flexible wand may be better for an offset route. Do not force a nozzle through a seal, pipe bend or obstruction.
3. Protect your water supply. Use suitable backflow protection at the water connection and keep sanitation equipment separated from drinking-water hoses and fittings. Do not let waste-contaminated equipment touch a potable-water outlet.
4. Control the flow. With the wand placed safely through the toilet into the tank, open water gradually and direct it as required. Avoid spraying wastewater back through the opening.
5. Drain, check and clean up. Let rinse water discharge through the tank outlet, follow the RV manufacturer's tank-flushing instructions, and clean and store the sanitation tools separately after use.

Need to service the drain valve as well?

Tank-cleaning equipment removes residue; it does not replace damaged gate seals, actuators or valve bodies. For those components, see our Valterra complete waste-valve and pipe-connection guide or Bladex replacement valve-body guide. If a remote valve handle is sticking, our Valterra replacement cable guide covers the available lengths and material types.