Stromberg Carlson makes 60-inch and 66-inch interior RV bunk ladders in silver and black. There are two different hardware families: domestic LA-2021460/LA-2021466 ladders and imported LA-460/LA-466 ladders. Identify the label on your ladder before replacing hooks, treads, end caps or feet.

Factory assembly and mounting diagrams

The LA-2021460/66 domestic bunk-ladder instructions (PDF) illustrate the loose treads, two top hooks, bracket positions and fastening sequence. The older LA-460/466 imported bunk-ladder instructions (PDF) show the large hooks, smaller mounting hooks and separate bracket hardware. Use the manual for the exact ladder family.

Choose the correct ladder series

Model family Lengths Factory replacement parts
LA-2021460 / LA-2021466

Domestic; B suffix is black

60 or 66 inches 2150 hardware kit, 8532-RB feet, 6538-MT treads, 6560/6566-VT tubes
LA-460 / LA-466

Imported; B suffix is black

60 or 66 inches 2460-A hardware, 8532-CP feet, 8538-T tread, 8539-CP end caps, FST-9975 connector nuts

Matching bunk ladders and replacement hardware

LA-2021460 — 60-inch silver domestic bunk ladder

Stromberg Carlson LA-2021460 60-inch silver domestic bunk ladder catalog photograph

Made-in-USA kit with four injection-molded treads, large hanging hooks and optional secured brackets. Match the 60-inch rail length.

View LA-2021460 product

LA-2021466 — 66-inch silver domestic bunk ladder

Stromberg Carlson LA-2021466 66-inch silver domestic bunk ladder catalog photograph

Longer made-in-USA kit in silver. Check the bunk height and allow for the required lean angle.

View LA-2021466 product

LA-2021460B — 60-inch black domestic bunk ladder

Stromberg Carlson LA-2021460B 60-inch black domestic bunk ladder catalog photograph

Black-finish 60-inch kit with the same domestic hook and tread family as LA-2021460.

View LA-2021460B product

LA-2021466B — 66-inch black domestic bunk ladder

Stromberg Carlson LA-2021466B 66-inch black domestic bunk ladder catalog photograph

Black 66-inch made-in-USA ladder. Use domestic model-specific replacement hardware.

View LA-2021466B product

LA-460B — 60-inch black imported bunk ladder

Stromberg Carlson LA-460B 60-inch black imported bunk ladder catalog photograph

Older imported four-tread ladder with a different mounting-hook and rung-accessory family from the domestic LA-2021460B.

View LA-460B product

2460A — Imported-ladder mounting kit

Stromberg Carlson 2460A imported-ladder mounting kit catalog photograph

Stromberg lists factory 2460-A for imported LA-460/466 mounting hardware. Check the existing small hooks and bracket style.

View 2460A product

8532CP — Imported-ladder rubber feet

Stromberg Carlson 8532CP imported-ladder rubber feet catalog photograph

Rubber foot caps for 1-inch-diameter imported bunk-ladder tubing. The domestic series uses separately numbered 8532-RB feet.

View 8532CP product

8539CP — Imported replacement tread end cap

Stromberg Carlson 8539CP imported replacement tread end cap catalog photograph

Black snap-in end cap specified for imported replacement tread 8538-T. Match the tread profile before ordering.

View 8539CP product

Upper hooks, brackets and replacement feet

Both ladder families offer a large top hook that fits over a suitable bunk fascia or a smaller hook used with mounted brackets. The domestic 2150 hardware kit and imported 2460-A kit are separately numbered. The domestic ladder also uses 8532-RB rubber feet; the imported ladder uses 8532-CP. Do not choose feet solely by the nominal one-inch rail diameter if the original cap shape differs.

Treads and end caps

The domestic 2021-series kit has four injection-molded treads, roughly 10 inches long by 2¾ inches wide. The matching replacement tread is 6538-MT. Imported LA-460/466 tread parts use 8538-T and a separate 8539-CP end cap. The imported 8510-CP is a tread cover, not a complete tread. Compare the profile and fastener openings before ordering individual rung parts.

Safe fit and installation

Stromberg specifies a 250 lb maximum load at an 11-degree mounting angle for the domestic bunk ladders. Measure the floor-to-bunk height and verify that the ladder hooks or mounting brackets engage a structurally supported bunk frame. The ladder tubes may be shortened following the correct manufacturer instructions. Before use, confirm the hardware is tight, the ladder feet rest firmly on the floor and the hooks cannot slip free.

For a ladder mounted outside the RV, use the separate LA-401/LA-401BA exterior ladder parts guide. Those rear-wall hinges and stand-offs are not substitutes for bunk-ladder hooks. Browse RV and camper ladders for complete ladder options.

Recently viewed

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

RV Parts Newsletter

Sign up for upcoming promotions!