LG-179013 — 29½-inch lead leg

Drive-side replacement leg for the 29½-inch outer-tube arrangement. The lead leg connects to the drive gearbox.
View LG-179013 productFind the correct lead leg, follow leg, foot or drive gearbox for a Stromberg Carlson fifth-wheel landing-gear system. The manufacturer offers two outer-tube lengths, 29½ inches and 33½ inches. Check the old leg length, drive side and cross-shaft arrangement before ordering.
Stromberg Carlson's illustrated LG-1 / LG-2 / LG-3 / LG-4 / LG-183708 installation manual lists each system's individual lead and follow legs, drive gearbox, cross shaft, foot-and-pin assemblies and mounting brackets. Its diagrams also show how the brackets sit above and below the raised tabs on the jack tube.
Open the manufacturer landing-gear parts and installation manual (PDF)
| Lead leg | Follow leg | Tube length | Original system |
|---|---|---|---|
| LG-179013 | LG-179014 | 29½-inch outer tubes | LG-1 (standard) / LG-3 (high speed) / LG-183708 (manual) |
| LG-177202 | LG-177201 | 33½-inch outer tubes | LG-2 (standard) / LG-4 (high speed) |
The lead leg takes power from the gearbox or crank; the follow leg is driven through the connecting cross shaft. Stromberg specifies 19⅞ inches of jack stroke and a separate drop-leg adjustment extending in one-inch increments. The replacement leg's outer tube is not the same measurement as the total extended height.

Drive-side replacement leg for the 29½-inch outer-tube arrangement. The lead leg connects to the drive gearbox.
View LG-179013 product
Opposite-side leg driven through the cross shaft in the standard two-leg system.
View LG-179014 product
Longer outer-tube lead leg, used in the LG-2 and LG-4 arrangements. Measure the original outer tube before selection.
View LG-177202 product
Companion follow leg for the 33½-inch outer-tube system. Confirm the original drive-shaft position.
View LG-177201 product
Factory foot-and-pin replacement. Stromberg identifies an 8 × 5-inch foot, 2 inches high; foot hardware is separate from replacement legs.
View LG-119225 product
Aluminum gearbox for the drive side of the Stromberg landing-gear assembly. Match the original shaft arrangement before replacement.
View LG-179015 product
Manual override and crank handle specified with the manufacturer's landing-gear systems. Use the matching gearbox input.
View LG-119226 productThe rectangular LG-119225 foot and pin is sold separately when selecting a replacement leg. Stromberg also lists LG-XS telescoping square drive shafts, LG-BRACKETS weld-on brackets and LG-179015 as the drive gearbox. The larger cross-shaft section attaches toward the follow leg in the factory assembly arrangement.
Use mounting brackets at the raised tube embossments to support both extension and retraction forces. Installation requires appropriate frame clearance and properly welded mounting brackets. Retraction before towing and correct drop-leg pin engagement are essential.
Stromberg identifies these replacement legs for matching Venture, Lippert and Pac-Rim landing gear. They are not the Fulton landing-gear replacement. Check the original tube length, attachment points, cross-shaft fit and lead/follow drive side rather than choosing by brand name alone.
For replacement motors, IP-rated switches and Venture-only internal gear kits, see the landing-gear motor and repair-kit guide. Browse RV jacks and leveling equipment for complete units and related parts.
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products