14032 — Black convertible jacks — pair
Two 2,000 lb manual convertible truck-camper jacks. The manual crank gearbox can be removed for the manufacturer-specified electric upgrade. Mounting brackets and crank handles are separate.
View 14032 productRieco-Titan Four-Corner Mechanical & Convertible Camper Jack Parts
Rieco-Titan's four-corner mechanical jacks and manual convertible jacks both raise and lower a truck camper with a crank, but their drive-head and mounting arrangements differ. Identify whether your jack is a fixed mechanical design, a removable convertible gearbox or an electric powerhead before choosing replacement parts.
Factory exploded mechanical jack parts diagram
The Rieco-Titan four-corner mechanical jack exploded drawing (PDF) identifies the gearbox cover, two bevelled gears, shaft, bearings, nylon bushings and inner/outer jack tubes by factory part number. The illustrated mounting version is C-clamp; fixed-plate components may differ.
For the separately designed convertible jack, see Rieco-Titan's convertible jack installation and operation drawings (PDF).
Which jack design is installed?
Mechanical four-corner jack
Manual crank gearbox attached to the jack post, with fixed-plate or C-clamp mounting options. For electric operation, Rieco-Titan specifies the mechanical-jack conversion kit, not the convertible-jack upgrade kit.
Convertible four-corner jack
Designed with a removable manual gearhead and jack post that accepts the specified electric powerhead upgrade. The 14032 set is two black jacks, rated at 2,000 lb each; the crank and mounting brackets are not included in that listing.
Replacement jacks and operating accessories
44240 — Zinc mechanical C-clamp jacks — pair
Pair of 2,000 lb four-corner mechanical jacks with zinc-plated finish. Use the C-clamp installation hardware specified for this mounting style.
View 44240 product44321 — White mechanical C-clamp jacks — pair
White-finish pair of 2,000 lb four-corner mechanical jacks. These are not interchangeable with a convertible post or an electric jack solely by appearance.
View 44321 product14334 — Manual crank handle
Removable hand crank listed for Rieco-Titan four-corner mechanical and manual convertible jacks. Match the crank socket on your original gearbox.
View 14334 product11094 — Manual jack drill adapter
Zinc-plated adapter for specified mechanical, convertible and tripod jacks with manual crank heads. Rieco-Titan lists use with 3/8-inch or 1/2-inch drill chucks.
View 11094 productMechanical gearbox and jack-tube identification
Use the part numbers below with the manufacturer exploded view. They identify the internal components of the illustrated C-clamp mechanical jack, not a universal spare-parts list for all convertible or electric jacks.
| Factory part number | Component | Notes |
|---|---|---|
| 443140 / 443141 | Outer tube for C-clamp mechanical jack | Zinc / white finish |
| 443164 | Inner tube assembly | One per jack |
| 993050 | Thrust bearing | One per gear drive |
| 993040 | Thrust bearing washers | Two |
| 993070 | Gear drive pins | Two |
| 993084 | Bevelled gears | Two |
| 993090 | Gear shaft | One |
| 993110 / 993111 | Gearbox cover | Zinc / white finish |
| 993124 | Gearbox-cover retaining wire | One |
| 993130 | Nylon bushings | Three |
| 993150 | Spacer tube | One |
| 994124 | Plastic crank spool | One |
Crank, drill adapter or electric conversion?
The 14334 crank handle is for Rieco-Titan manual four-corner and convertible gearboxes, while the 11094 drill adapter operates compatible manual crank heads through a drill. Converting to power operation requires the kit intended for your mechanical or convertible design. Rieco-Titan's factory installation guides show the gearhead removal and motor drive connection.
Safe operation and mounting checks
Check bracket design, camper-wall reinforcement, jack load ratings and ground contact before operating. Rieco-Titan's instructions call for raising the front corners in small increments, then bringing the rear level without ever raising the rear above the front. Keep the camper stable, disconnect truck tie-downs before unloading and avoid extending jacks against their built-in travel stops.
For bracket sizing and swing-clearance options, use the Rieco-Titan bracket guide. If your jack has a 12V electric powerhead, use the electric camper jack parts guide. See also the heavy-duty tripod jack guide, which covers a different mounting system.
Recently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products