MAXXSHADE white retractable RV vent shade
Manufacturer part number: 00-03900
View 00-03900 productMAXXAIR MAXXSHADE vs Plus: Roof Vent Shade Parts & Fitting
MAXXAIR's MAXXSHADE is a retractable interior sunshade fitted around a compatible RV roof-vent garnish ring. Its reflective-backed shade helps reduce light and heat. Choose the plain MAXXSHADE for shading without built-in lights or MAXXSHADE Plus when you also want integrated cool-white LED accent lighting.
Compare the actual products
MAXXSHADE Plus white RV vent shade with LEDs
Manufacturer part number: 00-03901
View 00-03901 product| Product | Factory part number | Key difference |
|---|---|---|
| MAXXSHADE | 00-03900 | Spring-loaded retractable shade without integrated lighting |
| MAXXSHADE Plus | 00-03901 | Same retractable shade concept, with integrated cool-white LED lighting requiring a compatible 12V electrical connection |
Both models are intended for compatible 14 × 14-inch RV roof-vent openings and mount at the interior trim, not on the exterior roof. The manufacturer describes a secure snap-lock closure and a reflective-backed shade. They are not replacement exterior domes or rain covers.
Identify the installation pieces
Existing garnish ring
The original trim ring around the ceiling opening is removed and retained for reinstallation.
MAXXSHADE adapter
Installed over the garnish ring and secured using four supplied screws.
Shade housing
Attaches to the adapter so the retractable material sits beneath the vent opening.
LED supply — Plus only
Connects the integrated lighting to a suitable fused 12V circuit; not needed for the plain shade.
Check the vent and electrical requirements
| Installation detail | What to check |
|---|---|
| Garnish attachment | The supplied adapter uses the existing garnish-ring area; some other-brand trims require suitable new mounting holes |
| Vent and fan operation | The shade must not interfere with the vent operator or the screen |
| Fan use | MAXXAIR warns not to run a powered ventilation fan with the shade fully closed, because the fan may overheat |
| LED Plus power | The manufacturer specifies 12V DC service with at least 2A available on a fused circuit |
| Electrical installation | Disconnect the vehicle's power first and follow the enclosed Maxxair instructions and applicable electrical codes |
Original manufacturer mounting diagrams
The drawings show the existing garnish ring, the shade adapter and the wire connections used on the LED Plus model. The PDF is shown below for a larger look at the mounting steps.
MAXXSHADE adapter and LED installation — factory drawing
Open the manufacturer PDF directly if the diagram does not display on your phone.
If you need more detail on the electrical connections, use the manufacturer's complete illustrated instructions. For a roof-mounted rain cover rather than an interior sunshade, see the MAXXAIR I+ / II comparison.
Recently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products