
Complete standard-length black power-arm kit. Confirm the 69-inch vertical wall clearance and the existing awning series.
View exact-number catalog productIdentify parts on a Lippert Solera 3000 Series 12V power awning, including the earlier “Solera 12V Power” name. The reference below distinguishes a complete 69-inch hardware kit from its individual arms, powered head, idler head, end cap and generation-specific electric motor. Read the label on the awning/roller before choosing a part: Solar, Smart Arm, 18V, manual crank and other Solera systems do not automatically share all components.
The genuine illustrated 12V 69-inch hardware-kit breakdown is Lippert CCD-0002243 (black kit 434723 / white kit 434724). Its letters A–I identify the hardware and head assemblies. The separate CCD-0002589 lists broader 3000 Series 12V components.
View Lippert's original 69-inch kit diagram and parts list
View Lippert's 3000 Series 12V component illustrations
Use Lippert's illustrated component list to identify the drive head, support arms and hardware, then compare the part-numbered photographs below.
Use Lippert's numbered illustrations to identify each component. Enlarge the drawing to read its callouts, then compare the part numbers with the replacement parts below.

Factory reference CCD-0002589 identifies original versus Regal drive and idler heads, end-cap numbers, motors and service parts across separate illustrated pages.
Open the nine-page illustrated OEM parts manualThe illustrated manual includes the individual components and corresponding Lippert part numbers.
Manufacturer drawing courtesy of Lippert.
Powered side of the roll tube. For black kit 434723 Lippert identifies 672050 as the Regal drive-head assembly.
Non-powered end of the roll tube: 672052 for the black Regal-style kit. Match the head generation.
The black standard 69-inch hardware kit lists arm assemblies 281154 and 656484. Pitch joints and gas struts must match the arm.
The rocker switch drives the motor in the powered head. Check motor connector type and manufacture date before selecting a replacement.
The original 434723 hardware-kit list identifies these components. Select a part-numbered product link where available, and confirm the installed arm length and head style before ordering.
Black pan-head fastener; six in kit
Black 69-inch support-arm assembly; one listed in kit
Matching productBlack battery-pack support-arm assembly; one listed in kit
Black #8-32 pan-head fastener; two in kit
Black upper bracket; two in kit
Black awning end cap; two in kit
Matching productBlack aluminium rivet; one listed in kit
Black Regal drive-head assembly (powered side)
Black Regal idler-head assembly (non-powered side)
Matching product
Complete standard-length black power-arm kit. Confirm the 69-inch vertical wall clearance and the existing awning series.
View exact-number catalog product
White counterpart to black kit 434723. Check the intended finish and mounting/operating configuration.
View exact-number catalog productWhite kit 434724 uses its own factory component numbers: 281152 standard support arm, 656483 battery-pack arm, 423750 end cap, 672049 drive head and 672051 idler head. Do not substitute the black parts solely because the names are similar. 434728 is a different manual/hybrid awning hardware kit, not a white 12V power replacement.

Factory callout B in black kit 434723; not the white arm 281152 or the complete two-arm kit.
View exact-number catalog product
Factory callout F on the 434723 black hardware-kit parts sheet; verify roll-tube/end-cap design.
View exact-number catalog product
Factory callout I for black kit 434723. This is the non-driven end; not the 672050 drive head.
View exact-number catalog productThe Solera 12V motor changed electrical connections on July 15, 2015. Lippert identifies 266149 for awnings built before that date (dual white connectors) and 373566 for awnings built after that date (one black two-way connector). These are not interchangeable solely because both are 12V Solera motors. The black switch kit 285500 is a distinct part; inspect switch/wiring style before replacement.

Lippert specifies this motor for Solera power awnings built before July 15, 2015. Verify two white connectors.
View exact-number catalog product
Lippert specifies this motor for Solera power awnings built after July 15, 2015. Verify the single black two-way connector.
View exact-number catalog product
Switch, plate and harness for a compatible power-awning control layout. Check existing wiring and switch opening.
View exact-number catalog productPart 280343 is a Solera gas strut for specified short and flat awning arms. Match your existing arm type, strut force, fully extended and retracted lengths, and end fittings before selecting a replacement. Struts for pitched arms are different.
A 69-inch standard flat arm is not the same as a short arm or pitched arm. Verify your unobstructed wall space, existing arm dimensions and hardware series.
Later black Regal idler 672052 is not a substitute for the drive-side 672050. Likewise, the older plain-head part family uses different identifiers.
An extended awning can move unexpectedly. Retract and secure the awning as directed by Lippert, isolate 12V power before electrical work, and follow the factory service instructions for removing a spring- or motor-loaded component. This guide is an identification aid, not a service procedure.
Browse related parts: Awning replacement parts and accessories · Awning fabric and arm hardware.
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products