If you are replacing an older outboard fuel hose, the primer bulb alone is not enough to identify it. Check the hose inside diameter, the style of the engine coupling, and whether the original tank adaptor is separate. Sierra 18-8013EP-2, 18-8016EP-2 and 18-8017EP-2 have distinct connection arrangements.

Three different ways the ends can be configured

Plain hose and bulb 18-8013EP-2 · 8 ft (2.4 m) · 5/16 in (7.9 mm). Separate end fittings needed.Compare this product
Mercury-style ends 18-8016EP-2 · 8 ft (2.4 m) · 3/8 in (9.5 mm). Double-sealed tank-side connection, clip-on engine end; separate tank adaptor may be needed.Compare this product
Yamaha-style ends 18-8017EP-2 · 8 ft (2.4 m) · 3/8 in (9.5 mm). Sierra 18-8076 fuel-line connectors; separate tank adaptor may be needed.Compare this product

Simple hose identification symbols, not a dimensional product or connector diagram. Refer to the matching product photographs and original connectors.

Tank connectors are not all included. Sierra identifies a separate tank adaptor for the Mercury- and Yamaha-oriented assemblies and does not supply end fittings with the universal 5/16-inch hose. Check included parts for the exact MPN rather than treating an eight-foot hose as a complete engine-to-tank kit.

Identify an unknown Sierra hose assembly

  1. Photograph the engine- and tank-side connectors before removing the old line.
  2. Read any Sierra part number and the hose marking, including 5/16- or 3/8-inch inside diameter.
  3. Check whether the old line has the Mercury/Mariner double-sealed tank-side style, the Yamaha-specific arrangement, or plain hose requiring separate fittings.
  4. Compare the primer bulb and fitting seals, and identify any separate tank adaptor rather than assuming it is inside the package.
  5. Match your exact outboard model and original connection before installing fuel components; seek marine service assistance when uncertain.

Compare hose diameter and end connection

Sierra MPN Purpose Hose ID Length Fittings
18-8013EP-2 Universal / fittings required 5/16 in (7.9 mm) 8 ft (2.4 m) Separate end fittings needed
18-8016EP-2 Selected Mercury/Mariner applications 3/8 in (9.5 mm) 8 ft (2.4 m) Double-sealed tank-side connection, clip-on engine end; separate tank adaptor may be needed
18-8017EP-2 Selected Yamaha applications 3/8 in (9.5 mm) 8 ft (2.4 m) Sierra 18-8076 fuel-line connectors; separate tank adaptor may be needed

Sierra lists premium fuel hose with polyester-braid reinforcement, a CPE outer cover and flexible THV barrier layer. Confirm fuel-system compatibility and exact connector geometry independently.

Compare the three corresponding store listings

Use the product photographs to compare the existing connectors, then check the UsedRVParts listing for condition and availability.

UsedRVParts viewing and pickup are by appointment in Kelowna. Check each product listing for stated condition.

Recently viewed

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

RV Parts Newsletter

Sign up for upcoming promotions!