An older Putco LED strip may appear black until it is lit. To identify it, measure the complete bar and check its manufacturer number and turn-signal colour. The amber-turn 92009 series and red-turn 92010 series can both be 48 or 60 inches long, so length does not identify its lighting sequence.
Identify the original turn-signal colour
Red running and brake, amber turn signals, white reverse.
Red running, brake and turn signals, white reverse. No amber turn function.
Colour swatches show functions conceptually, not the actual LED layout or wiring sequence.
Check the old light bar and pickup wiring
- Find the original 92009 or 92010 marking, if present, and measure the housing end to end.
- Test the old turn-signal colour where safe; amber indicates the 92009 family, red indicates the 92010 family.
- Measure the mounting clearance and check the bar's adhesive or bracket condition.
- Inspect the connector and existing adapter harness. Do not assume that all trucks share the same plug-and-play connection.
- Verify the specific truck electronics and any towing/trailer-detection system before replacing the light.
Compare exact Putco Blade numbers
| MPN | Length | Turn | Run / brake | Reverse |
|---|---|---|---|---|
| 92009-48 | 48 in | Amber | Red | White |
| 92009-60 | 60 in | Amber | Red | White |
| 92010-48 | 48 in | Red | Red | White |
| 92010-60 | 60 in | Red | Red | White |
Product length is the nominal light bar length. Measure clearance for the tailgate to open, license plate and trim, and any sensors or camera.
Open the matching tailgate bar listing
Check the individual listing for condition and availability; compare the image and manufacturer number.
UsedRVParts viewing and pickup are by appointment in Kelowna. Check each product listing for condition.