CURT gooseneck puck-system hardware includes complete ball-and-anchor kits, separate chain-anchor pairs and small replacement retaining-pin sets. The part numbers are not interchangeable. Match the original anchor MPN and truck's factory prep package before replacing a damaged or missing pin.
Separate the anchor, retaining pin and complete kit
60617 and 60691 are removable safety-chain anchor sets for different OEM puck-system applications. Both are black steel, but their related replacement pin numbers differ.
19250 supplies the replacement retaining components for 60617 anchors. 19251 supplies the corresponding parts for 60691 anchors. Neither is a complete anchor pair.
60618 and 60692 include a 2-5/16-inch gooseneck ball, chain-anchor hardware and storage bag for their selected OEM puck configurations.
Match anchor MPNs to replacement retaining pins
Use the stamped original part number where possible; a similar-looking retaining pin is not an approved substitute.
| MPN | Component | Package contents | Compatibility reference |
|---|---|---|---|
| 60617 | Drop-in safety-chain anchors | Set of two anchors | Replacement retaining pins: 19250 |
| 19250 | Anchor retaining-pin replacement | One primary anchor pin and lynch pin | For CURT 60617 anchors |
| 60618 | Gooseneck ball and anchor kit | 2-5/16-inch gooseneck ball, anchors, storage bag | Ram OEM puck prep |
| 60691 | Drop-in safety-chain anchors | Set of two anchors | Replacement retaining pins: 19251 |
| 19251 | Anchor retaining-pin replacement | One primary anchor pin and lynch pin | For CURT 60691 anchors |
| 60692 | Gooseneck ball and anchor kit | 2-5/16-inch gooseneck ball, anchors, storage bag | Selected Ford, GM and Nissan OEM puck prep |
Inspect the anchor sockets and pin engagement
Inspect the factory truck-bed puck sockets, retaining pins and lynch clips for bending, corrosion and incomplete engagement. Confirm the truck's OEM fifth-wheel/gooseneck prep package, not just the vehicle badge. Do not use an anchor with missing or unidentified locking hardware.
CURT 60618 and 60692 are sold as complete kits with a manufacturer-stated 30,000-lb gooseneck ball rating. That does not establish a 30,000-lb rating for a loose replacement pin or the towing capacity of the entire truck and trailer combination. Always observe the lowest-rated component.
If the original anchor type is uncertain, use its identifying markings and CURT's application instructions before reusing hardware.
Find the exact CURT anchor or pin
Open the matching MPN to check the current listing and availability.
CURT 60617
A matching pair of removable safety-chain anchors for a compatible Ram OEM puck system.
Check part details and availability
CURT 19250
Replacement pin components for the 60617 anchor family; safety-chain anchors not included.
Check part details and availability
CURT 60618
30,000-lb ball-rated accessory kit for specified Ram 2500/3500 factory gooseneck prep systems.
Check part details and availability
CURT 60691
Pair of removable chain anchors for selected Ford, GM and Nissan OEM puck configurations.
Check part details and availability
CURT 19251
Pin replacement for 60691 anchors; not a ball, anchor pair or complete towing kit.
Check part details and availability
CURT 60692
Complete 30,000-lb ball-rated OEM puck accessory kit, for exact manufacturer-supported vehicles.
Check part details and availabilityRelated OEM gooseneck equipment identification
UsedRVParts viewing and pickup in Kelowna are by appointment.