C.E. Smith 13515
Galvanized hub kit · 5 on 4½ in bolt circle
Pre-greased hub with bearings, dust cap, cotter pin and lug nuts
Review matching listingIdentify C.E. Smith Trailer Hub, Dust Cap & Wheel Hardware
Replacing an unfamiliar trailer hub cap or wheel fastener? The most useful clues are the original C.E. Smith part number, the measurement of the hub opening, and whether the hardware attaches the wheel or retains the hub on the spindle. This chart separates parts that can otherwise be confused during a trailer service.
Identify C.E. Smith hub hardware by MPN
| MPN | Function | Measurement or specification | What distinguishes it |
|---|---|---|---|
| 13515 | Galvanized hub kit | 5 on 4½ in bolt circle | 1⅜-to-1¹⁄₁₆-in tapered spindle; 1,750 lb per hub |
| 16200A | Plain hub dust caps | 1.980 in nominal hub bore | Protect the axle-nut area |
| 16271 | Spring-loaded bearing protectors | 1.985 in nominal hub bore | Chrome-plated steel, with pressure-relief feature |
| 11052A | Open-end acorn lug nuts | ½-20 thread | Zinc-plated, 13⁄16-in hex |
| 16720A | Extra-long acorn lug nuts | ½-20 thread | Chrome-plated, conical seat |
| 11062A | Conical-seat wheel bolts | ½-20 × 1⅝ in long | Zinc-plated |
| 11065A | Spindle nuts and washers | For specified spindle hardware | Separate from the wheel's lug nuts |
A 16200A is a plain metal hub dust cap for a nominal 1.980-inch bore, while 16271 is a chrome-plated bearing protector for a 1.985-inch bore. The protector's grease-pressure mechanism makes it more than a plain snap-in cap. Those nominal dimensions do not establish universal interchangeability.
The 13515 is a much larger component: a galvanized, pre-greased 1,750 lb hub kit with a 5-on-4½-inch bolt pattern for a specified tapered spindle. It includes the manufacturer's hub hardware, so check what remains from the original assembly before buying separate parts.
Fit is determined by the actual hub, wheel and spindle. A 1.980-inch dust-cap specification and a 1.985-inch bearing-protector specification are not blanket interchangeability claims. Measure the hub bore and use the approved installation instructions. Likewise, matching ½-20 threads does not establish the correct wheel seat, hardware length, strength or tightening specification.
Identify which part needs replacement
- Read the MPN and inspect the component: a hub body, dust cap, bearing protector, wheel nut and spindle nut are distinct parts.
- Measure hub openings: use the correct inside seating diameter for dust caps or protectors. Do not select an item solely because its rounded nominal size seems close.
- Check wheel-mount design: 11052A is a zinc-plated open-end acorn nut; 16720A is an extra-long chrome acorn nut. Both use ½-20 threads, but wheel-seat and stud compatibility still matter.
- Look for wheel bolts versus studs: 11062A consists of five ½-20 conical-seat wheel bolts, 1⅝ inches long. They are different from nuts that attach to permanent wheel studs.
- Inspect the spindle end: 11065A belongs to the spindle nut and washer arrangement, not the wheel lug fasteners. Verify shaft threads and retainer type before replacing.
- Confirm the exact assembly: for a complete hub, compare spindle measurements, bearing and seal requirements, bolt pattern and load rating. Replace damaged hardware using the axle manufacturer's procedure.
Match product photos to the correct part number
These UsedRVParts listings are marked Brand New. Open each exact MPN to check current condition, quantity supplied and availability. Eligible local viewing and pickup in Kelowna is by appointment.
C.E. Smith 16200A
Plain hub dust caps · 1.980 in nominal hub bore
Plain metal dust caps, manufacturer packaged as a pair
Review matching listing
C.E. Smith 16271
Spring-loaded bearing protectors · 1.985 in nominal hub bore
Grease-retaining bearing-protector system; different from a plain cap
Review matching listing
C.E. Smith 11052A
Open-end acorn lug nuts · ½-20 thread
Five wheel nuts; check wheel seat and stud size
Review matching listing
C.E. Smith 16720A
Extra-long acorn lug nuts · ½-20 thread
Five extended wheel nuts, not the short open-end type
Review matching listing
C.E. Smith 11062A
Conical-seat wheel bolts · ½-20 × 1⅝ in long
Five bolts for compatible threaded hubs, not wheel studs
Review matching listing
C.E. Smith 11065A
Spindle nuts and washers · For specified spindle hardware
Two spindle nuts with washers; verify the exact shaft and retainer
Review matching listingOther trailer wheel and mounting references
For other wheel mounting and trailer hardware, compare our spare tire mounting identification and square U-bolt identification. Use the correct original part and dimensions for each installation.
Recently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products