If the mounting flange is polished stainless steel, first check whether the rod tube slopes 30°, 15° or straight down. Attwood's three standard flush-mount models have identical nominal tube diameters and lengths, but different angles and cap colours. The adjustable 5010-4 has a separate cradle and top/side mounting base rather than a flush tube.
Identify the original fixed or adjustable mount
66362-7 is 30°, 66363W7 is 15° with a white cap, and 66364-7 is the straight 0° model.
Look for a black rod cradle with a deep-tooth adjustment gear and separate top/side combination base.
Attwood part numbers, angle and gasket colours
Attwood's published angle is a fixed tube designation for its stainless holders, not an adjustable mounting range.
| MPN | Construction | Rod position | Tube diameter | Cap / gasket | Mounting style |
|---|---|---|---|---|---|
| 66362-7 | Stainless flush mount | 30° angled | 2 in | Black cap gasket | Oval flange; fixed through-deck |
| 66363W7 | Stainless flush mount | 15° angled | 2 in | White cap gasket | Oval flange; fixed through-deck |
| 66364-7 | Stainless flush mount | 0° / straight | 2 in | Black cap gasket | Oval flange; fixed through-deck |
| 5010-4 | Pro Series adjustable | Adjustable; gear lock | Not published as 2-in flush tube | No flush-mount cap specified | Combination top or side mount |
For the three stainless models, published tube length is 7½ inches. The -7 / W7 retail variants include cap/gaskets; replacement gasket MPNs and exact mounting clearances should be checked against the original holder.
Measure before replacing a rod holder
Inspect the existing oval-flange opening, mounting fastener pattern, tube angle, protective liner and cap seal. Confirm available clearance below the deck and identify where water drains from an open-end holder. A 15° tube should not be assumed to drop into a 30° installation without interference.
The 5010-4 is a top/side-mount Pro Series holder, not a flush-mount stainless sleeve. Conversely, the stainless 66362, 66363 and 66364 families use fixed 30°, 15° and 0° tube configurations. Choose the complete mounting design appropriate to the boat.
Match the rod and reel dimensions and intended use to the holder. Follow the boat builder's drilling, bedding and load requirements before installation.
Find the exact Attwood rod holder
Open the model number to review its original listing and current availability.
Attwood 66362-7
Original style: 30° angled. Oval flange; fixed through-deck. Black cap gasket.
Check part details and availability
Attwood 66363W7
Original style: 15° angled. Oval flange; fixed through-deck. White cap gasket.
Check part details and availability
Attwood 66364-7
Original style: 0° / straight. Oval flange; fixed through-deck. Black cap gasket.
Check part details and availability
Attwood 5010-4
Original style: Adjustable; gear lock. Combination top or side mount. No flush-mount cap specified.
Check part details and availabilityRelated rail mounting parts
UsedRVParts viewing and pickup in Kelowna are available by appointment.