Need a replacement HappiJac camper jack, support bracket or controller? This 4220 / 4820 identification guide separates the jack body, drive motor, crank, mounting reinforcement and swing-out components. Use the printed OEM number and the existing system's hardware details to identify the correct part before ordering.

HappiJac 4220 and 4820 camper jack illustrated identification diagram for motor, jack body, crank and Z, L, flat mounting brackets
Camper jack and bracket identification. The Z, L and flat brackets are different mounting options; match your existing bracket to the factory parts list below.

Understand the bracket profiles before ordering

182491 is a 5-inch mounting bracket, 182492 is the 16-inch L reinforcement, 182493 is the 16-inch Z mounting bracket, and 182494 is the 16-inch flat mounting bracket. These are different profiles. These bracket profiles are alternatives for different mounting arrangements, not components that all install together. Check camper mount, jack model, orientation, hole pattern and loading instructions.

HappiJac replacement jacks, brackets and controls

Maker callout G

759927 — Vertical CCS motor head, white

Vertical CCS motor head, white 759927 replacement part photograph

This is the vertical current-sensing drive head, not a universal motor for every HappiJac controller.

View this part

Maker callout H

736514 — 4220 Acme screw jack, white

4220 Acme screw jack, white 736514 replacement part photograph

Complete single 4220 jack; verify rating, lift and mounting arrangement from the jack label.

View this part

Maker callout I

736515 — 4820 heavy-duty Acme jack, white

4820 heavy-duty Acme jack, white 736515 replacement part photograph

Different model from the 4220. Match the exact 4820 jack specification rather than relying on cabinet colour.

View this part

Maker callout J

182496 — Swing-out extension bracket pair, white

Swing-out extension bracket pair, white 182496 replacement part photograph

A pair of extension brackets for the intended HappiJac mounting arrangement. Check truck clearance and the correct jack brackets.

View this part

Maker callout L

182436 — Standard 4-inch crank handle

Standard 4-inch crank handle 182436 replacement part photograph

Manual crank for the applicable HappiJac drive hub; differs from the longer 8-inch 1824362 option.

View this part

Maker callout P

182491 — 5-inch mounting bracket

Manufacturer lists a distinct 5-inch mounting bracket; inspect hole spacing and existing bracket before replacement.

Maker callout Q

182492 — 16-inch L-reinforcement bracket

16-inch L-reinforcement bracket 182492 replacement part photograph

L-profile mounting reinforcement. Not equivalent to the 182493 Z-profile or 182494 flat bracket.

View this part

Maker callout R

182493 — 16-inch Z-mounting bracket

16-inch Z-mounting bracket 182493 replacement part photograph

This listing is for a previously owned Z-profile bracket. Check its photos, condition and mounting holes before ordering.

View used bracket

Prefer a new bracket? Lippert lists 182493 as a single 16-inch Z-bracket for HappiJac 41, 42, 45 and 48 series camper jacks. View new 182493 bracket.

Maker callout S

182494 — 16-inch flat mounting bracket

Flat mounting bracket for the specified jack installation. The 182492 L-reinforcement bracket has a different profile and is not interchangeable.

Maker callout B

723915 — Wireless remote controller, 25A/CCS

Wireless remote controller, 25A/CCS 723915 replacement part photograph

Specifically for the 25A/CCS system. Do not confuse with older 183070 remotes for controller 139315.

View this part

Electric-drive and remote-control compatibility

The white 759927 vertical CCS motor head and 723915 wireless controller belong to specified current-sensing equipment. Lippert also identifies an older 183070 remote only for obsolete controller 139315, with a different controller/remote upgrade kit (733540). Do not choose a remote by colour alone. If replacing any electric control assembly, confirm the original control board, jack model and wiring generation.

Safe jack replacement and factory drawings

Camper jacks carry substantial loads. Support the camper independently before removing a jack or mount. Confirm the mounting system and installation requirements in the manufacturer's documents; follow Lippert's installation and lifting instructions; the illustration is for identifying parts. For the manufacturer’s exploded drawings, see Lippert / HappiJac camper jack components (CCD-0004333, PDF).

For complete jacks and related hardware, browse truck camper jacks or camper mounting and tie-down equipment. Compare the listed part number and mounting arrangement with your existing setup.

Recently viewed

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

RV Parts Newsletter

Sign up for upcoming promotions!