Go Power Weekender 83295 Parts Diagram

Identify the Go Power Weekender ISW 83295 by its 1500W inverter, separate GP-TS transfer switch and solar PWM controller. This reference helps match the existing components to catalog photos before selecting replacements or a panel expansion.

Weekender ISW 83295 solar, battery and transfer layout

Trace each major part to see what it does before replacing it.

Solar and DC path

200W rooftop solar panelSC connector leads and appropriate roof routing

30A PWM controllerRegulates solar charging of the battery

12V battery bankBattery-side fuses and correctly sized cables

GP-ISW1500 inverterUses battery energy for pure sine wave AC

External AC and selected loads

Shore or generatorExternal AC source, independent from solar

Separate GP-TS 30A switchPasses appropriate external AC; inverter is the other source

Selected RV AC circuitsFollow factory panel, neutral and grounding diagrams

Existing RV converterNot part of the Weekender kit

Original functional overview, not a wire-to-terminal installation schematic. Actual inverter output and AC service conditions depend on the specific model and RV distribution layout.

How the Weekender works

The Weekender's PWM solar controller recharges the 12V batteries from roof solar. Its 1500W GP-ISW1500 inverter supplies selected AC loads from battery energy. The GP-TS changes the AC source to shore/generator when appropriate external power is available.

There is no AC battery charger in the Weekender ISW. The RV's existing converter/charger is still needed for shore-power battery charging. The transfer switch is limited to 30A service; the system must not be treated as a 50A dual-leg unit.

Weekender component identification

Kit component	Identifying model / rating	Role in RV
PV panel	200W framed module (GP-PV-200M)	Solar supply
Solar controller	GP-SB-PWM-30-BT 30A PWM	Battery charging and monitoring
Inverter	GP-ISW1500-12, 1500W pure sine	Battery DC to 120V AC
Transfer switch	GP-TS, separate 30A	Automatic shore / inverter changeover
Remote	GP-ISW-R	Inverter on/off and status
Battery DC installation	GP-DC-KIT3, #2 AWG / 200A	Protected inverter battery cabling
Solar cables and mounts	25-ft red/black solar cables, mounting hardware	Rooftop panel connection
Shore AC battery charging	Uses existing RV converter	Not built into Weekender ISW

Check the kit generation: The numbered 83295 200W system is associated with a Bluetooth PWM controller, but earlier Weekender builds can have different panels and control hardware. Check the label before buying a spare part. OVERLANDER-E requires an approved PV expansion design.

Find the corresponding catalog photos

Use the complete kit, inverter, remote, switch and cable photos to identify the exact original equipment. These independently listed parts are not all extra purchases needed with the boxed system.

Complete Weekender kit

Go Power Go Power 83295 Weekender ISW system catalog photograph

Go Power 83295 Weekender ISW system200W solar, 1500W inverter and GP-TS components. See listing for availability and further details.

Inverter, switch and installation parts

Go Power GP-ISW1500-12 (79950) 1500W inverter catalog photograph

GP-ISW1500-12 (79950) 1500W inverterThe 1500W ISW family; check installed version. See listing for availability and further details.

Go Power GP-TS 30A transfer switch catalog photograph

GP-TS 30A transfer switch30A automatic switch, not an IC transfer board. See listing for availability and further details.

Go Power GP-ISW-R (79999) remote catalog photograph

GP-ISW-R (79999) remoteDesignated ISW inverter remote. See listing for availability and further details.

Go Power GP-DC-KIT3 #2 AWG 200A cable kit catalog photograph

GP-DC-KIT3 #2 AWG 200A cable kitBattery cable and Class T protection. See listing for availability and further details.

Solar expansion possibility

Go Power Go Power OVERLANDER-E 200W panel catalog photograph

Go Power OVERLANDER-E 200W panelSeparate 200W panel expansion; controller and connector limits apply. See listing for availability and further details.

Go Power manufacturer diagrams and documentation

The manufacturer's system manual shows the physical PV, battery and AC arrangement. Use the exact revision of the installed inverter, controller and transfer equipment for electrical installation and terminal wiring.

Weekender factory wiring diagram (PDF) · GP-TS wiring reference (PDF) · Manufacturer Weekender system details

Electrical safety: Solar panels can remain energized in daylight. Disconnect shore, generator and battery sources before work. High-current DC connections and AC transfer wiring should be performed by qualified RV electrical personnel following the factory instructions.

New & Updated RV Parts Inventory — Check Back Often

We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.

If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.

Text or email us with the product number or model, and we’ll check availability for you right away.

Our Products

Go Power Weekender 83295 ISW1500 & Transfer Parts Reference