5-inch replacement monitorC-FOS07TAPK-009Vision S display only; mount, power cable and cameras sold separately.
See product detailsFurrion Vision S Camera Parts, Photos & Installation Diagrams
Furrion Vision S RV camera systems combine a wireless rear or side camera with a monitor inside the tow vehicle. When replacing a damaged part, it matters whether you need the display, its mounting hardware, a camera bracket, an antenna, a light lens or a power adapter. These are separate components, not complete camera kits.
View Available Parts With Photos
Identify the Vision S series and the part number on your existing component before selecting a replacement. The newer Vision S+ range uses different cameras and accessories; similarly shaped parts are not necessarily interchangeable.
Vision S components and model differences
| Furrion number | Replacement | Choosing the right part |
|---|---|---|
| C-FOS07TAPK-009 | 5-inch replacement monitor | Vision S display only; mount, power cable and cameras sold separately. |
| F2BC004XXBK | 7-way camera power adapter | Switch-equipped adapter for supplying 12V camera power through a tow vehicle’s 7-way connector. |
| FRCBRKT2-BL | Rear sharkfin camera bracket | Black Vision S rear or doorway camera mount with wiring and gasket; camera not included. |
| C-FOS07TAPK-005 | Replacement camera antenna | Thread-on antenna for Furrion Vision 1, Vision 2 and Vision S; not Vision S+. |
| C-FOS07TAPK-015 | 5- and 7-inch monitor suction mount | Windshield suction-cup mount for Vision S 5-inch and 7-inch displays, not the 4.3-inch version. |
| C-FOS07TAPK-002 | Amber side-marker lens | Single amber cover for a Vision S side camera’s marker light; camera not included. |
Monitor and camera installation diagrams
Furrion's Vision S manual illustrates the monitor, side-camera and rear-camera controls, along with the mounting brackets and wiring connections. Use the labeled illustrations to locate the power inlet, camera antenna, pairing button and marker-light assemblies.
Open Furrion Vision S illustrated manual (PDF)
For later model revisions and additional installation documents, see Furrion's Vision S support manuals.
Replacing a 5-inch monitor
The C-FOS07TAPK-009 is a replacement 5-inch Vision S display. It is supplied as the monitor only. The windshield mount and power lead are separate; a C-FOS07TAPK-015 suction mount fits the Vision S 5-inch or 7-inch screen, while the 4.3-inch screen uses another mounting arrangement. A replacement display for Vision S is not a replacement display for Vision S+ or older Vision 1/2 systems.
Rear camera mounting and reception
If the camera is intact but its outer mounting base is damaged, the FRCBRKT2-BL sharkfin bracket provides the mounting bracket, wiring and gasket for matching Vision S rear or doorway cameras. It does not include the camera. For a damaged external antenna, the C-FOS07TAPK-005 is an articulating replacement antenna for Vision S and certain older Vision systems; it does not fit Vision S+.
Side marker light and camera power
The C-FOS07TAPK-002 amber cover replaces the side-marker light lens on compatible Vision S side-camera housings, not the camera or its bracket. For systems that need a reliable camera power feed through the tow vehicle connector, F2BC004XXBK is a switched 7-way adapter designed for Vision S camera installations. It can help where certain tow-vehicle power-management systems interrupt the camera supply.
A separate C-FOS07TAPK-006 monitor power cable is also available for Furrion Vision 1, Vision 2 and Vision S monitors. It uses a 12-volt automotive accessory plug. Match the original power input before replacing the cable.
Before fitting an electrical part
Turn off the vehicle and isolate electrical power before working on the camera wiring. Keep the existing camera and monitor part numbers handy, and follow the manufacturer's installation instructions for connectors, mounting seals and pairing. A camera image or similarly sized monitor alone does not establish that two systems work together.
Find the part by photograph
5-inch replacement monitorC-FOS07TAPK-009
7-way camera power adapterF2BC004XXBKSwitch-equipped adapter for supplying 12V camera power through a tow vehicle’s 7-way connector.
See product details
Rear sharkfin camera bracketFRCBRKT2-BLBlack Vision S rear or doorway camera mount with wiring and gasket; camera not included.
See product details
Replacement camera antennaC-FOS07TAPK-005Thread-on antenna for Furrion Vision 1, Vision 2 and Vision S; not Vision S+.
See product details
5- and 7-inch monitor suction mountC-FOS07TAPK-015Windshield suction-cup mount for Vision S 5-inch and 7-inch displays, not the 4.3-inch version.
See product details
Amber side-marker lensC-FOS07TAPK-002Single amber cover for a Vision S side camera’s marker light; camera not included.
See product detailsRecently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products