Dometic Traveler 511PS Toilet Parts & Exploded Diagram

The Dometic Traveler 511PS is a short-pedestal, foot-flush ceramic RV toilet. Its water valve, vacuum breaker, bowl seals and floor connection can be serviced individually. Use the numbered factory drawing below to identify the part and check the complete model number on the toilet base before ordering.

View Available Parts With Photos

The 511PS is not the same parts configuration as a 510+. In particular, its base, pedestal cover and flush-pedal cover have different part numbers.

Dometic 511PS exploded parts diagram

The 511PS factory drawing identifies 17 component positions, from the seat and ceramic bowl to the pedal mechanism, base and floor flange. The most recent Dometic sanitation parts guide lists this model under “511 Public Sanitation” on printed page 142.

Open the 511PS factory parts drawing (PDF)

Parts by diagram number

Bowl loses water: which seal do you need?

The 385311462 flush-ball seal kit fits around the bowl outlet (diagram 7). It differs from the 385310063 floor/base seal at the bottom of the toilet (diagram 16). If standing water gradually disappears from the bowl, inspect the flush-ball sealing surfaces; if water leaks around the floor connection, examine the lower seal and installation hardware.

Water valve or vacuum breaker?

The 385314349 water valve (diagram 14) opens and closes the incoming flush-water supply. The 385316906 vacuum breaker (diagram 3) is part of the water-supply connection to the bowl. The vacuum breaker shown is for the standard arrangement without a separate hand sprayer; verify the existing plumbing before replacing it.

Pedal and base differences from the 510+

The 511PS factory list specifies a 385312004 white or 385312005 bone short-pedestal base kit and a 385311551 white or 385311552 bone pedal cover. Its pedal/lever cartridge is 385311553, and the spring cartridge is 385236096. These are separate from the 510+ base and pedal arrangements. Match the installed model and original mechanism when selecting an internal repair kit.

Seat colours and floor mounting

The 385343829 white seat and 385343831 bone seat are separate replacement options, both identified at position 1. Check the bowl's hinge spacing and colour before choosing.

Dometic lists floor-flange mounting hardware separately from several 3-inch flange styles. The threaded, socket, spigot and 45-degree swivel flanges are different connections, and the flange itself is not included with every toilet configuration. Follow the correct installation procedure when removing or resealing the base.

More Dometic Traveler toilet parts

For the taller-base arrangement, see the Dometic Traveler 510+ parts guide. You can also consult Dometic's earlier 511PS parts list (PDF) when identifying a service number on an older unit.

Turn off the fresh-water supply and relieve pressure before disconnecting the water valve or supply hose. Refit the bowl and base seals following Dometic's instructions, and check for leaks after the toilet is reassembled.

Find Traveler 511PS parts by photo

Replacement water valve385314349

Controls fresh water when the 511PS flush pedal is operated. Diagram 14.

View this part

Flush-ball seal kit385311462

Two seals for the toilet's bowl outlet, listed at diagram 7.

View this part

Floor and base seal385310063

Seals the lower toilet-to-floor connection; different from the bowl seals. Diagram 16.

View this part

Vacuum breaker kit385316906

Protects the water connection at the bowl; the no-hand-sprayer version. Diagram 3.

View this part

White seat and cover385343829

White elongated seat/cover for the listed Traveler bowl, diagram 1.

View this part

Bone seat and cover385343831

Bone-coloured alternative for the matching bowl, diagram 1.

View this part