Carefree Spirit FX & Fiesta Awning Parts Diagram and Hardware Guide

Identify the individual hardware components on a Carefree Spirit FX or Fiesta manual patio awning, including the brace slider, support arms, wall brackets, travel locks, fabric clamp and roller spring assemblies. Use the manufacturer's awning label to determine the exact series before ordering; an otherwise similar-looking arm may belong to a different generation.

Identify awning parts in the drawing

Identify the part by its role and stamped number. This functional parts map intentionally avoids depicting a specific arm mounting angle or roller-spring arrangement.

Roller tube and fabric

Canopy, roller end caps, pull strap 901011; separate left- and right-hand spring choices.

Support arms and rafters

Main support arms, brace slider R00405 and adjustment knob 901022; confirm straight/curved hardware.

Wall mounting hardware

Upper bracket 901018, lower bracket 901019 and carport foot 901020 in designated configurations.

Travel and handling

Travel lock 901017, arm handle 901015 and manual pull wand 901035.

Use the official Carefree illustrated parts list linked below for true mechanical orientation, left/right placement and exploded hardware quantities.

Carefree parts identified by OEM number

901020 — Black carport foot

Mounting foot at the lower end of applicable awning arm.

View matching part

901017 — Black travel lock

Locks applicable Spirit FX/Fiesta support arm while traveling.

View matching part

901015 — Black awning arm handle

Hardware adjustment handle; compare colour, style and original arm.

View matching part

R00405 — Brace slider

For a regular brace. Curved hardware uses R00405-2; pre-1997 versions can use R00549.

View matching part

901022 — Arm locking knob

Retains an adjustable rafter brace at the selected position.

View matching part

902801 — Black canopy clamp

Fabric clamp; separate white variant is 902801W.

View matching part

901018 — Black top wall bracket

Upper hardware bracket; 901018W is white.

View matching part

901019 — Black bottom wall bracket

Lower mounting bracket; installation and stand-off details vary.

View matching part

901011 — 93-inch black awning pull strap

Manual awning fabric pull strap, used with a compatible pull wand.

View matching part

901035 — 43-inch pull wand

Manufacturer-listed wand for applicable manual roll-up awnings.

View matching part

R00925BLK-A — Right spring assembly, black

For specified 8–18 ft awning variants; check tube details, width and handedness.

View matching part

960515WHT — Manual awning arm set, white

63–68 inch manufacturer-labeled hardware set. Verify the installed mounting height and kit generation.

View matching part

Check right/left side, arm style and colour

Find your factory awning identification label

Look for the awning information on the roller tube and arm hardware inside the lower arm channel. Record both numbers plus fabric width, arm finish and installation height before ordering. White and black parts frequently carry different suffixes.

Official illustrated parts references

Carefree Spirit FX / Fiesta illustrated parts list contains the actual exploded diagrams and full SKU suffix definitions. Also consult the Carefree patio awning service manual for serial-number locations and model identification.

Model distinction: The illustration on this page is for Spirit FX and standard Fiesta awnings; Fiesta HD and Fiesta Lite use separate factory parts lists. See the Carefree manual awning service manual (April 2026, PDF) for their distinct diagrams. Compare Carefree manual and slideout awning diagrams without opening a PDF.

Spring safety: Roller torsion springs store considerable energy even when the fabric is stowed. Do not loosen roller end caps or dismantle spring assemblies without manufacturer service procedures and appropriate training.

For a complete awning rather than one component, see patio awning assemblies.