Factory diagram item 2
R001848 — Roller tube attachment kit
Two roller-tube attachment clips and retaining rings. Carefree's tabbed e-clips replace the earlier round e-clips and idler-side push nuts and washers.
View matching partCarefree Latitude Single-Stage Awning Parts Diagram & Repair Guide
This Carefree Latitude single-stage repair-parts reference is organized around the manufacturer's original 2018 Direct Response (DR) service drawing. Identify the roller components, electric motor, head covers, arms, gas spring and switch by factory part number, then follow a matching listing for the specific component. Do not use this single-stage parts key as a complete dual-stage or BT12 parts list.
Original Carefree single-stage exploded-parts illustration
For the actual mechanical drawing, open the factory Latitude Service Manual 070005-301r5. The single-stage exploded drawing is on printed page 13, with its numbered parts table and original-versus-current wall-bracket comparison on pages 13–14.
View Carefree Latitude factory exploded drawing (PDF)Use the factory drawing and the matching part photographs below to identify the correct Latitude components.
Component locations by factory item number
Items 1–6
R001782 length-specific roller; R001848 retention clips; R001783 motor covers; R001784 motor; R001810 gearbox.
Items 7–10
R060686-003 DR controller; R012659 motor bracket; R001785 idler cover; R012660-001 idler bracket.
Items 11–18
R001786 LH arm / R001787 RH arm; R001788 spring; separate R001791 arm-attachment hardware.
Items 19–25
Original R019376 brackets versus revised R019397; R019468-006 switch, SR0115 bezel. Do not cross-fit mount revisions.
Latitude single-stage replacement components
Factory diagram item 3
R001783-005 — Motor-end cover, white
White motor-head cover; not the actual electric drive motor.
View matching partFactory diagram item 3
R001783-006 — Motor-end cover, black
Black finish of the original Latitude motor-cover kit.
View matching partFactory diagram item 5
R001784 — 12V Latitude drive motor
Motor assembly; confirm the roller drive, gearbox and original awning configuration.
View matching partFactory diagram item 7
R060686-003 — Direct Response control module
Motion-responsive control for the earlier Direct Response system; not confirmed for BT12-generation control systems.
View matching partFactory diagram item 9
R001785-005 — Idler-end cover, white
Non-motor side cover; original white finish.
View matching partFactory diagram item 9
R001785-006 — Idler-end cover, black
Black non-motor side end-cover kit.
View matching partFactory diagram item 10
R012660-001 — Idler-side bracket
Factory reference for idler-side bracket; this is not the wall's original/current mounting-plate assembly.
View matching partFactory diagram item 12
R001787-005 — Right single-stage arm, white
Single-stage RH arm (white); do not use in place of dual-stage R001794.
View matching partFactory diagram item 13
R001788 — Single-stage gas spring
Latitude single-stage gas spring; not automatically compatible with the OTD or dual-stage models.
View matching partFactory diagram item 18
R001791 — Arm attach-pin kit
Kit for one arm, separate from replacement arm assembly.
View matching partFactory diagram item 24
R019468-006 — Direct Response black switch kit
The factory part associated with this older DR system; verify existing controller rather than treating it as BT12 universal.
View matching partCritical compatibility distinctions
Single-stage manufacturer numbers include R001786 (LH), R001787 (RH) and R001788 (gas spring). Dual-stage parts instead include R001793, R001794 and associated dual-stage hardware. An arm profile alone does not prove interchangeability.
R019376 original brackets differ from R019397 updated brackets. Carefree expressly states that the designs are not interchangeable; original brackets have a three-hole pattern near the knuckle. Match the installed plates.
The 2018 DR manual lists R060686-003 control and R019468-006 switch; a separate Latitude BT12 manual covers newer wireless electronics. Verify your actual control label before ordering.
Other factory identification numbers
R001782-xxx roller tube, R001810 gearbox, R012659-001 motor bracket, R040905-001 spring hooks, R001823 single-stage barrel, R001790 cable retainer, R001792-xxx QuickConnect and R040925-001 canopy funnel appear in the factory service list. Use the full part number, including any colour or size suffix, when checking a replacement.
Before buying a replacement
Record the Latitude roller label/serial number, single- versus dual-stage arm style, power-control generation, left/right placement, original bracket hole pattern and cover finish. White suffix -005 and black -006 apply only where specified by the manufacturer.
Safety: The awning is powered and its spring arms can move under load. Disconnect the battery before electrical service; follow manufacturer instructions for structural repairs rather than loosening loaded arm hardware.
Explore patio awning equipment, or compare the separate Travel'r adjustable-pitch and Eclipse guides to avoid confusing the equipment families.
Recently viewed
New & Updated RV Parts Inventory — Check Back Often
We’re always adding new and used RV parts to our inventory, so be sure to check back regularly.
If you don’t see the part you need today, we may still have it in stock—our internal database includes thousands of new RV parts that are not yet listed online.
Text or email us with the product number or model, and we’ll check availability for you right away.
Our Products