B&B Molders Exterior RV Shower 94195/94196: Doors, Heads & Parts

If the outside shower on your RV has a broken cover, leaking faucet, damaged hose or missing shower-head holder, the complete hatch may not need replacing. B&B Molders lists individual service pieces for its 94195 polar-white and 94196 black exterior shower assemblies. The parts below are organized by what you can see and replace.

Find the exterior shower replacement part

Complete exterior shower size

The manufacturer's 5M-style exterior shower specification gives a 6 × 11 1/16-inch wall opening and an approximately 8 7/8 × 13 7/8-inch outside face, with a total installed depth of 4 11/16 inches. A cutout measurement describes the opening through the RV wall; the larger outside face covers the surrounding wall. Check the depth behind the panel as well as the outer measurements.

Replacement locks depend on the original key and hatch arrangement. The manufacturer lists 391-key and 751-key versions of complete assemblies, while the standalone 94188 and 94189 doors are listed without locks. Compare your original hinges and lock before ordering a door by colour alone.

What the separate service components replace

The 94197/94198 head, 94199/94200 hose and 94201/94202 head holder are different pieces. Replacing one does not imply the other parts are included. For a faucet problem, the 94203/94204 replacement is the control assembly, rather than the entire shower box.

Photographs and available replacement parts

94196 — Exterior shower, black

Full black enclosure; separate shower components can be identified by the numbers below.

View 94196 product

94188 — Replacement door, polar white

White replacement door only; no lock supplied.

View 94188 product

94189 — Replacement door, black

Black replacement door only; check the original hinge and lock.

View 94189 product

94197 — Shower head, polar white

White head for the matching shower assembly; hose is a separate component.

View 94197 product

94198 — Shower head, black

Black head for the matching exterior shower; hose not included.

View 94198 product

94199 — Shower hose, polar white

White hose for the matching shower layout.

View 94199 product

94200 — Shower hose, black

Black hose for the matching shower layout.

View 94200 product

94201 — Shower head bracket, polar white

White holder that secures the shower head in its parked position.

View 94201 product

94202 — Shower head bracket, black

Black one-position holder for the shower head.

View 94202 product

94203 — Shower faucet, polar white

White two-knob control assembly with the matching vacuum breaker.

View 94203 product

94204 — Shower faucet, black

Black two-knob control assembly with the matching vacuum breaker.

View 94204 product

Before installing a replacement

1. Find the original hatch or shower identification and check the white or black version.
2. For a door, match the hinge position, lock provision and overall size.
3. For a hose or head, check the connection at both ends and the holder style.
4. For a complete shower, measure the wall cutout, outside cover and available cavity depth; follow the RV manufacturer's waterproofing instructions.

Manufacturer parts illustration

Open B&B Molders' exterior shower and replacement-parts catalog (printed page 13). On phones, the PDF may open in a separate viewer.

The factory reference shows the complete 94195/94196 assemblies and lists the individual door, head, hose, holder and faucet numbers.