Descripción
The Raymarine RV-100, manufacturer part A80464, is a black plastic transom transducer that lets a suitably equipped Raymarine display show fish and underwater features in multiple sonar modes. High-frequency CHIRP, DownVision, SideVision and RealVision 3D share one sensor housing, so you do not need separate thru-hull transducers for those four functions.
For boats with a compatible RealVision connection
RV-100 uses the Raymarine RealVision 25-pin transducer input. It is intended for displays or sonar modules specifically designed for RealVision 3D or RealVision 3D Max; confirm your display's exact transducer socket before ordering. It is the transom-mount RV-100, not the RV-200 bronze thru-hull or split-pair versions.
What it provides
- CHIRP soundings for fish and depth targets, DownVision for detail below the boat, SideVision for views to port and starboard, plus 3D interpretation of bottom structure.
- Integrated AHRS motion sensing helps keep 3D imagery aligned during turns and wave motion.
- Fast temperature measurement at the stern.
- A pivoting stainless mounting bracket that can kick up when the transducer strikes an obstacle.
Specifications
- Raymarine MPN: A80464
- Model: RV-100 RealVision 3D
- Mounting: Plastic transducer on stainless transom bracket
- Cable: 8 m / 26.2 ft, for the RealVision 25-pin connection
- Physical size: 256.6 mm long × 120.5 mm high
- Mass with bracket: 647 g
- Specified operating temperature: −2 to +55°C
- Waterproof ratings: IPX7/IPX8, plus IPX6 on exterior hull surfaces
- Manufacturer maximum range figures: CHIRP 274 m, DownVision 183 m, SideVision 91 m, RealVision 3D 91 m; environmental conditions affect achievable range
Box contents
RV-100 sensor and attached eight-metre cable, stainless mounting bracket, retaining bolt and serrated nylock nut, three bracket screws, escutcheon plate, five cable clips, nine screws for the clips/escutcheon, connector locking collar and ring kit with fitting tool, plus the installation instructions.
Planning the installation
Mount where the transducer sees relatively undisturbed water and leave enough slack for the kick-up bracket. Cable extensions and specialized mounting hardware are separate purchases; Raymarine identifies step-mount bracket A80479, jack-plate bracket A80480 and spacer kit A80482. This listing is for the transducer assembly, not a fishfinder screen.
Gastos estimados de envío
También te puede interesar
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestras colecciones



