Taylor Made Super Gard Fenders: Boat Size, Colour & MPN Chart

When a boat comes alongside a dock, a properly sized inflatable fender cushions the hull at the contact points. Taylor Made's Super Gard line uses ribbed marine-grade vinyl to reduce rolling and a molded-in needle-valve seat for inflation. This chart compares white, Mid Atlantic blue and Black Onyx options in three common cylindrical sizes so you can find the exact manufacturer number.

Choose the right cylindrical fender size

5½ × 20 inchesTaylor Made lists this as a minimum selection for boats approximately 15–20 feet long. Available here in white, blue and black.
6½ × 22 inchesA larger fender size listed for boats 20–25 feet long, with the same three colours available.
8½ × 26 inchesThe largest size in this chart, with manufacturer guidance for 25–35-foot boats. Choose placement for actual dock height and conditions.

Taylor Made Super Gard fenders by exact MPN

Taylor Made MPN Colour Diameter × length Boat-length guide Product quantity
950520 White 5½ × 20 in 15–20 ft One inflatable fender
951520 Mid Atlantic blue 5½ × 20 in 15–20 ft One inflatable fender
952520 Black Onyx 5½ × 20 in 15–20 ft One inflatable fender
950622 White 6½ × 22 in 20–25 ft One inflatable fender
951622 Mid Atlantic blue 6½ × 22 in 20–25 ft One inflatable fender
952622 Black Onyx 6½ × 22 in 20–25 ft One inflatable fender
950824 White 8½ × 26 in 25–35 ft One inflatable fender
951824 Mid Atlantic blue 8½ × 26 in 25–35 ft One inflatable fender
952824 Black Onyx 8½ × 26 in 25–35 ft One inflatable fender
Boat-length recommendations are a starting minimum, not a universal fitment rule. Taylor Made recommends considering local marina advice and prevailing docking conditions. Wind, wake, vessel displacement, hull shape, dock height and how the fender is hung can all affect the size and quantity needed. A larger or additional fender may be advisable.

Inflation, fender line and dock-contact checks

  1. Match hull and dock: Decide where each fender should rest before approaching a slip, piling or another boat. A fender that rides too high or too low may leave the hull unprotected.
  2. Use the manufacturer's inflation pressure: Taylor Made lists 2 PSI for Super Gard. Its integrated rubber needle valve is a functional inflation point, not the absence of a valve.
  3. Use suitable rope: Taylor Made states the fender eye accepts line up to ⅝ inch diameter. Inspect the eye and line for wear or damage.
  4. Check fender quantity: Taylor Made's general sizing guidance recommends at least three fenders, with additional protection as hull length or docking risk increases.
  5. Inspect used items: Confirm the actual product condition, valve operation, inflation retention, vinyl surface and eye holes before relying on a used fender. Catalog photographs alone are not proof of an individual item's condition.

Common questions

Is 950520 the same size as 952520? Yes. Both are 5½ × 20-inch Super Gard fenders. 950520 is white and 952520 is Black Onyx.

Do these fenders have an inflation valve? Yes. Taylor Made describes a molded-in valve seat with a rubber football needle valve. Refer to the manufacturer for safe inflation instructions.

Does a product include a pair? The nine MPNs in this chart are listed as individual fenders. They are not two-packs.

Can I use a fender cover instead of an inflatable fender? No. A cover fits over a compatible fender to protect the finish and does not replace its cushioning function.

Find Super Gard fenders by size and colour

Choose from the nine UsedRVParts product listings below. Check individual listing availability and item condition; the product cards show catalog reference images rather than inspected photos of a specific used part.

Related marine fender guides

If your boat needs a fender with a centre rope passage for horizontal or vertical hanging, use our Taylor Made Big B fender identification chart. For fitted polyester sleeves, see the fender cover size chart. For fixed padding attached to a dock rather than the boat, compare the dock edge-guard profiles.

Manufacturer size and inflation reference: Taylor Made Super Gard specifications.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Enlaces rápidos populares

Frigoríficos usadosPiezas nuevas para refrigeradoresHornos usadosNuevos calentadores de aguaHornos y encimeras nuevosAire AcondicionadoToldos y repuestos nuevosPuertas y ventanas nuevasEnganches y Cajas de AcopleCamper sobre camionetaAccesorios para camionetasMarina

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!