To identify Taylor Made dock edging, start with the cross-section and package number. Side Gard, P-Shape, C-Shape and Medium Edge Gard profiles protect different contact areas; a similar colour does not establish the same fitting. This guide helps compare seven 10-foot Taylor Made references by their moulding style, finish and original packaging.
Recognize the dock contact area
Runs along exposed dock sides to cushion contact against the face. Premium and commercial-grade versions have different manufacturer part numbers.
Uses a rounded profile at an exposed dock edge. The standard black 45994 and commercial double-molded 46012 are not the same grade.
Other cross-sections for dock-perimeter protection. The heavy-duty white C-Shape 46056 differs from Medium Edge Gard 46058.
A 10-foot coil should not be confused with a 10-foot straight section. Packaging style affects how the edging is handled and installed.
Match the part number on the original edging
The references below are each 10-foot catalog packages; product profiles and packaging forms vary.
| Manufacturer MPN | Profile | Colour | Construction | Package |
|---|---|---|---|---|
| 45969 | Commercial Side Gard | Silver | True Color commercial-grade edging | 10 ft retail pack |
| 45990 | Premium Side Gard | Black | Vinyl | 10 ft coil |
| 45992 | Premium Side Gard | White | Vinyl | 10 ft coil |
| 45994 | Standard P-Shape | Black | Vinyl | 10 ft coil |
| 46013 | Commercial Side Gard | Confirm listing | Double-molded PVC | 10 ft coil retail |
| 46056 | Heavy-Duty C-Shape | White | Double-molded vinyl | 10 ft coil |
| 46058 | Heavy-Duty Medium Edge Gard | White | Double-molded vinyl | 10 ft coil retail |
Inspect the existing dock edge before replacement
Measure the existing dock-edge contact surface, inspect old fasteners and check whether the original moulding is wrapped around a corner or attached flat to the side. Confirm the required run length, dock-board profile and whether a coil or straight section will be easier to fit.
Taylor Made 45990 and 45992 are coiled Premium Side Gard in different colours. 46013 is a commercial double-molded Side Gard, while 46056 is a C-Shape and 46058 is Medium Edge Gard. They serve related but distinct edging applications.
Dock edging complements correctly sized boat fenders and appropriate mooring practices; it does not eliminate the need for them.
Look up the exact Taylor Made dock edging
Open a matching MPN to inspect the product listing and current availability.
Taylor Made 45969
Silver Side Gard intended to blend with aluminum dock finishes; verify the installation surface and profile.
Check listing and availability
Taylor Made 45990
Premium side-protection profile; the black coiled package is different from the straight-length MPN.
Check listing and availability
Taylor Made 45992
White version of the premium coiled side profile, distinct from the black MPN.
Check listing and availability
Taylor Made 45994
Rounded P-shaped edge-protection profile, rather than a Side Gard or C-Shape.
Check listing and availability
Taylor Made 46013
Commercial-grade double-molded Side Gard with heavier wall construction.
Check listing and availability
Taylor Made 46056
C-shaped heavy-duty profile intended for dock perimeter protection.
Check listing and availability
Taylor Made 46058
Medium Edge Gard profile for a different dock-edge geometry from P-Shape or C-Shape.
Check listing and availabilityRelated boat fender identification
UsedRVParts viewing and pickup in Kelowna are by appointment.