Brand New • Online Only

Raymarine A80465 RV-200 0° Bronze Through-Hull Sonar

Ahorrar $330.00
Raymarine MPN: A80465 UPC: 723193816530

Precio:
Precio de venta$1,002.00 Precio habitual$1,332.00

Gastos de envío calculados en la caja

Stock:
Solo quedan 9 unidades

Descripción

The Raymarine A80465 RV-200 is a single bronze sounder transducer for boats using compatible RealVision 3D sonar equipment. Mounted through the hull, it provides CHIRP fishfinding, downward and side-looking sonar, and three-dimensional bottom imaging from one low-profile housing. Water-temperature sensing is integrated, and an internal attitude-and-heading reference sensor (AHRS) reduces motion-related distortions.

Confirm hull fit before ordering

RV-200 A80465 has zero-degree internal element offset. Raymarine specifies it for a relatively level hull section with 0–6° deadrise. The bronze body is suitable for properly prepared fiberglass and wooden hulls, not a metal hull or a positive-ground electrical installation. Higher-angle hull sections require a different model, such as the RV-212 or RV-220 pairs; they are not interchangeable with this single sensor.

What the four sonar channels show

  • Wide-spectrum CHIRP sonar identifies targets in the water column.
  • DownVision reveals detail beneath the hull.
  • SideVision reaches outward to port and starboard.
  • RealVision 3D helps visualize the contour and structure of the bottom.

Technical information

  • Exact manufacturer part: A80465, RV-200
  • Form: Low-profile cast-bronze thru-hull, 0° offset
  • Hull angle: 0° to 6° at the mounting point
  • Connection: RealVision 3D 25-pin type, with 8-metre (26.2 ft) cable
  • CHIRP sonar depth range: Up to 274 m (900 ft)
  • DownVision maximum range: 183 m (600 ft)
  • SideVision and 3D: Up to 91 m (300 ft) each
  • Dimensions: 308 × 105.3 × 166 mm, including the specified cable-bend clearance
  • Mass: 2.588 kg
  • Ingress ratings: IPX7 / IPX8; exterior hull surfaces IPX6
  • Temperature range: −2°C to +55°C

Package contents

One RV-200 transducer with attached lead, bronze nut, rubber seal, internal isolator sleeve, cable guard, anti-rotation bolt and retention hardware, connector locking pieces and Raymarine fitting instructions. No chartplotter, separate sonar module or fairing block is included.

Compatible electronics

A suitable Raymarine RealVision 3D receiver is required, including selected Axiom RV and Axiom+ RV displays, Axiom Pro RVX variants or the RVX1000 sonar module with a supported multifunction display. Confirm the exact rear-panel sonar socket and software before connecting. The published depth ranges are manufacturer performance ceilings and depend on water conditions, mounting position and display configuration.

Gastos estimados de envío

También te puede interesar

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestras colecciones