Brand New • Online Only

Maretron TFT-5H Focus Tube Kit for TLM100/TLM150

Economisez $45.00
Maretron MPN: TFT5H UPC: 873804002729

Prix:
Prix réduit$138.00 Prix normal$183.00

Frais de port calculés au paiement

Stock:
Plus que 5 en stock

Description

The Maretron TFT-5H focus tube provides a guided sound path for a TLM100 or TLM150 ultrasonic tank-level monitor. Mounted at an SAE J1810 five-bolt tank opening, it helps maintain level readings on vessels that pitch or roll. In suitable non-displacement hull installations, the focus tube supports measurements through up to 15° of pitch or roll, compared with 6° when using the tank monitor alone.

Applications and specifications

  • Part number: TFT-5H (catalogue SKU TFT5H)
  • Tank monitor: Maretron TLM100 or TLM150
  • Mount: SAE J1810 five-bolt tank flange
  • Tube: trim to the tank's measured depth
  • Installed clearance: finish approximately 1 in (25.4 mm) above the bottom of the tank

Included components

  • One focus tube, five-hole gasket and centre-hole tube cap
  • Five 10-24 × 3/4-in stainless steel machine screws
  • Five #10 stainless steel washers
  • One packet of epoxy, wooden mixing stick and installation instructions

Installation guidance

Measure the tank depth, cut the tube to length and deburr the edge. Position the focus-tube gasket carefully at the five-bolt opening before fastening the tube and mounting the tank-level monitor. Use 10–15 in-lb torque for the sensor fasteners. The cap provides a reflective surface at low fluid levels and helps keep solids away from the transducer in applicable waste tanks.

Important for gasoline tanks: The supplied epoxy is suitable for water and diesel, but not gasoline. Use a gasoline-compatible adhesive when fitting the cap for a gasoline tank. Allow the cap adhesive to cure for 24 hours before immersion, and avoid threadlockers containing methacrylate ester because they can damage the plastic enclosure.

The TLM100/TLM150 sensor and its own mounting gasket are not supplied in this kit. The separate TFTDBE-5H model raises the sensor to eliminate the deadband; it is a different accessory.

Estimer la livraison

Vous aimerez peut-être aussi

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos collections