Brand New • Online Only

New ICON Stage 1 HOSS 2.0 Bronco Lift System K40011

Economisez $783.00
Icon MPN: K40011

Prix:
Prix réduit$2,374.00 Prix normal$3,157.00

Frais de port calculés au paiement

Stock:
Plus que 1 en stock

Description

The new ICON K40011 kit is a four-corner suspension upgrade for a 2021–2026 Ford Bronco already equipped with the factory HOSS 2.0 system. Four aluminum-body EXP shocks replace the original dampers, providing selectable ride-height settings without changing the factory coil springs. The HOSS 2.0 requirement is critical—this is not the kit for standard HOSS 1.0 suspension or Bronco Raptor.

Ride height and construction

Each 2.5-inch EXP shock uses grooves in its body to position a snap ring for lift adjustment. Front settings span 0 to 2 inches, with 0 to 1.75 inches available at the rear on a stock-equipped Bronco. The 7/8-inch induction-hardened shafts and hard-anodized aluminum bodies handle heat and corrosion; internal-reservoir damping is tuned for the original Bronco springs. The shocks can be serviced or revalved.

Parts supplied

The package contains a pair of front shock assemblies (48602) and a pair of rear shock assemblies (48612). Springs, spring mounts and other original spring hardware are reused. It installs using bolt-on mounting points, without cutting or welding.

Check the suspension before buying

  • Fits selected 2021–2026 Ford Bronco vehicles with HOSS 2.0. Yellow factory shock bodies are a useful identification clue.
  • Above 1.5 inches of lift, front upper control arms with suitable alignment geometry are recommended; ICON offers 48400DJ or 48500DJ.
  • A non-Sasquatch Bronco moving to 35 × 12.50-inch tires benefits from optional 42000 clearance bars. For 37-inch tires, 611082 front bump-stop spacers and additional clearance modifications are required.
  • Inspect ball-joint clearance through the full suspension cycle and recalibrate advanced driver-assistance equipment after fitting.

Carton: 32 × 6 × 5 inches; 52 lb manufacturer-listed shipping weight. Finished height depends on truck weight and equipment.

Warranty

ICON shock absorbers are covered against manufacturing defects for one year. Eligible non-shock suspension parts have limited lifetime coverage for the original retail purchaser under the manufacturer's terms. Coverage excludes normal wear, improper installation and other stated conditions.

Estimer la livraison

Vous aimerez peut-être aussi

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos collections