Description
When replacing an older black hose outlet on a boat, the hull cutout and rear hose barb need to match. Attwood part 3873A1 is the straight polypropylene through-hull made for a 3/4-inch inside-diameter hose, with a black exterior flange and threaded mounting stem.
Measure the existing fitting
The correct hull opening is 1-1/8 inches across. The stem is 3-1/4 inches long, the face flange is 1-3/4 inches across, and the fitting supports a hull thickness of up to 1-1/4 inches. All measurements should be compared against the removed fitting and available hose routing.
Specification summary
- Manufacturer MPN 3873A1
- 3/4-inch hose inside diameter
- Black polypropylene construction
- 1-1/8-inch cutout; 1-3/4-inch outer flange
- 3-1/4-inch stem; up to 1-1/4-inch hull thickness
- Can accommodate the separately obtained 7534A bailer plug
Use this plastic connector above the waterline only. Check the hose and hull sealing arrangement before fitting; it is not a below-waterline fitting. Larger Attwood connector numbers have different dimensions.
Estimer la livraison
Vous aimerez peut-être aussi
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos collections
