Part GFEL-MG-BU-DP
MotorGuide family — Blue
MotorGuide-oriented blue variant; check the exact propeller and shaft configuration.
View exact partT-H Marine G-Force Eliminator Prop Nuts: Minn Kota vs MotorGuide
Find the Correct T-H Marine G-Force Eliminator Prop Nut
A trolling motor prop nut must fit the correct motor shaft and propeller assembly. The T-H Marine G-Force Eliminator family has versions associated with MotorGuide and Minn Kota motors, including a separate small-prop variant. Use the manufacturer part number and your existing prop setup to identify the correct choice.
Identify your trolling motor before choosing a nut
1. Find the motor make and model
Look at the model label or documentation for your Minn Kota or MotorGuide unit. A generic propeller size alone is not enough.
2. Check the propeller assembly
Confirm the existing nut, shaft arrangement and any thrust washer or retaining hardware required by the motor manufacturer.
3. Match the precise version
Compare the full GFEL-series part number, including the motor-family and small-prop identifiers. Colour is not a fitment specification.
The Eliminator uses a broad contact surface intended to help steady the propeller assembly, with cooling ports in its design. This is a replacement retaining nut, not a complete propeller or a universal repair kit for worn shafts, damaged propellers or incorrect thrust washers.
Fitment reminder: The guide distinguishes manufacturer part-number families. It does not claim compatibility with every motor sold under the Minn Kota or MotorGuide names. Check the exact motor and propeller before ordering.
Compare four G-Force Eliminator models
These four separate MPNs should not be treated as interchangeable. The listed colour helps identify a variant, but the motor family and propeller version are the primary fit checks.
| Part number | Variant family | Colour | Product type |
|---|---|---|---|
| GFEL-MG-BU-DP | MotorGuide family | Blue | Eliminator prop nut |
| GFEL-MG-C-DP | MotorGuide family | Black | Eliminator prop nut |
| GFEL-MK-BU-DP | Minn Kota family | Blue | Eliminator prop nut |
| GFEL-MKS-R-DP | Minn Kota family; small-prop variant | Red | Eliminator prop nut |
What is the difference between MotorGuide and Minn Kota versions?
The GFEL-MG part-number family is designated for MotorGuide applications and includes the blue and black variants shown here. The GFEL-MK family is the Minn Kota-designated line. The GFEL-MKS-R-DP represents the red small-prop version, which should not be substituted for the standard version without verifying the actual propeller assembly.
Do not rely on the assumption that an aftermarket nut advertised for “most trolling motors” will fit your exact model. Propeller and shaft configurations can differ within a single manufacturer's range.
Match the part number to the product listing
Part GFEL-MG-C-DP
MotorGuide family — Black
MotorGuide-oriented black variant; select only after confirming the motor family and prop nut.
View exact part
Part GFEL-MK-BU-DP
Minn Kota family — Blue
Minn Kota-oriented blue variant; verify the exact motor and propeller before fitting.
View exact part
Part GFEL-MKS-R-DP
Minn Kota family; small-prop variant — Red
Red small-prop version in the Minn Kota family; confirm exact prop geometry and shaft requirements.
View exact partBefore replacing your prop nut
Disconnect the trolling motor's electrical supply before inspecting or servicing the propeller. Remove fishing line and debris, inspect the propeller hub and shaft for damage, and retain any washers or pins specified by the motor manufacturer. Follow the exact motor manual for nut installation and tightening. Do not overtighten to compensate for damaged or missing parts.
For related marine equipment identification, see the livewell pumps, cartridges and pickups guide or the T-H Marine outboard jack plate identification page.
Frequently asked questions
Can I choose an Eliminator nut by colour?
No. Colours identify particular listed variants, but compatibility depends on your specific motor and propeller configuration. Match the exact manufacturer part number.
Are all Minn Kota propellers compatible with GFEL-MKS-R-DP?
No such universal compatibility is established. This is the small-prop version; identify the motor and propeller before purchasing.
Does an Eliminator nut replace a damaged propeller?
No. The product is a propeller-retaining nut. Check for bent or broken propeller components and use the appropriate service parts for those faults.
Can I arrange to see a listed part?
UsedRVParts viewing and pickup are available by appointment in Kelowna. Contact the store to confirm the product and arrange a visit.
Quick links: GFEL-MG-BU-DP · GFEL-MG-C-DP · GFEL-MK-BU-DP · GFEL-MKS-R-DP
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos