If the original outboard bracket is missing its label, identify whether it has a hydraulic actuator or a fixed offset. Full-size ATLAS black plates, compact Micro-Jacker units and clamp-style Mini-Jacker brackets have different load ratings and transom mounting. A jack-plate position gauge or trim switch is an accessory, not the motor bracket itself.

Recognize the original jack plate style

ATLAS standard hydraulic Full-size powered adjustment. The black 10- and 12-inch setback examples shown here are rated by T-H Marine up to 300 hp and 625 lb.
ATLAS Micro-Jacker Smaller hydraulic assembly with four-inch setback, rated up to 115 hp and 425 lb. Check the specific motor's actual weight.
Mini-Jacker bracket Non-hydraulic cast-aluminum offset bracket for compatible clamp-on motors up to 35 hp and 150 lb.

Simplified design silhouettes, not scaled drawings or drilling templates. Use the manufacturer's installation layout for mount points.

Match both engine horsepower and weight. Motor weight, transom strength, installation hardware and boat design must all suit the exact plate. T-H Marine lists ATLAS standard and Micro-Jacker as different families, and the small Mini-Jacker has no hydraulic actuator.

Five checks for a safe replacement match

  1. Photograph the existing bracket and actuator, if present, and record the outboard's rating plate and measured weight information.
  2. Determine whether the original has an integrated hydraulic motor or is a static clamp-on bracket.
  3. Check the setback from the transom to the motor mounting face: models shown include 4, 10 and 12 inches.
  4. If identifying a failed readout, the FAGK-2-DP gauge only fits specified 6-/10-/12-/14-inch ATLAS designs; it is not for the Micro-Jacker.
  5. Check transom integrity, fastener requirements and electrical controls with a qualified marine installer before replacing the assembly.
Controls are separate from the structure. The TTC-1-DP push-button switch can control compatible trim or hydraulic jack plates; the FAGK-2-DP is an ATLAS position readout with specific model compatibility. Neither is a hydraulic jack plate or an installation hardware kit.

Compare exact model markings and dimensions

MPN Series or part Setback Published motor limit / role Operation
AHJ-10V-B-DP ATLAS Black 10 in 300 hp / 625 lb Hydraulic adjustment
AHJ-12V-B-DP ATLAS Black 12 in 300 hp / 625 lb Hydraulic adjustment
AHJM-4-DP ATLAS Micro-Jacker 4 in 115 hp / 425 lb Hydraulic adjustment
MJ-1-DP Mini-Jacker 4 in 35 hp / 150 lb Fixed bracket; 3-in vertical offset
FAGK-2-DP ATLAS position gauge Not applicable Not an engine mount In-dash gauge; model-specific
TTC-1-DP Trim / jack-plate switch Not applicable Switch only Flat-surface remote control

Motor limits are manufacturer ratings for the identified product family; they do not establish suitability for a specific boat or transom. Accessory rows are not outboard mounting plates.

Compare matching jack plate products

Review the listed product photo and exact MPN, then check condition and availability before ordering.

Full-size hydraulic ATLAS models

These standard black ATLAS versions have 10- and 12-inch setbacks and internally mounted hydraulics. Their mounting location must be verified.

The smaller Micro-Jacker

The four-inch-setback powered Micro-Jacker is intended for much smaller outboards than a standard ATLAS plate.

Fixed Mini-Jacker offset

The MJ-1-DP is a small cast-aluminum offset bracket with no hydraulic motor.

Associated controls and instruments

FAGK-2-DP and TTC-1-DP are separate components; verify the supported jack plate and original wiring.

UsedRVParts product viewing and pickup are by appointment in Kelowna. Check each listing for condition and availability.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!