Identify Camco Sidewinder & Rhino Sewer Hose Supports
A Camco sewer-hose support may be a folding Sidewinder with hinged cradles or a Rhino kit made of separate nesting troughs. They can look similar when packed away, but their lengths and missing-piece checks differ. Use the original part number and the layout below to identify the correct product.
Recognize Sidewinder and Rhino layouts
Sidewinder hinged supports
Camco 43031, 43041, 43051 and 43061 form a continuous, winding line of lightweight plastic cradles. The deep holders keep the hose in place without separate tie-down straps. The 30-foot model stores with a strap instead of a carry handle.
Rhino 43071: height-adjustable trays
Six 30-inch troughs can be placed independently along a hose run of up to 20 feet. Stakes allow elevation up to 10 inches where needed to route over a curb; the trays also work on hard surfaces without staking.
Rhino 43072: nesting supports
Five separate orange support sections suit an RV sewer-hose run of up to 15 feet. They nest together for storage, with a strap for the set.
Match the hose run, not just the box
Measure the path from the RV waste outlet to the dump connection, allowing for obstacles. A 20-foot hose-support rating does not mean every part provides a continuous 20 feet of cradle.
Camco sewer-hose support comparison
| Camco MPN | Support family | Hose run | Design | Storage / pieces |
|---|---|---|---|---|
| 43031 | Sidewinder | 10 ft | Continuous hinged cradle | Carry handle |
| 43041 | Sidewinder | 15 ft | Continuous hinged cradle | Carry handle |
| 43051 | Sidewinder | 20 ft | Continuous hinged cradle | Carry handle |
| 43061 | Sidewinder | 30 ft | Continuous hinged cradle | Carrying strap |
| 43071 | Rhino adjustable | 20 ft | Six separate 30-inch troughs | Nesting troughs and stakes |
| 43072 | Rhino nesting | 15 ft | Five separate supports | Nesting sections and strap |
Identification and completeness checks
- Look for the Camco part number and measure the fully extended support; four Sidewinder models share the same hinged construction but have different lengths.
- Inspect all Sidewinder hinges and cradles for cracking. Check whether its correct carry handle or storage strap remains attached.
- For Rhino 43071, count six separate trays and inspect the height-adjustment stakes; a partial kit cannot cover the original intended run.
- For Rhino 43072, check for five nesting support sections and the original securing strap.
- Confirm the actual condition and contents in the product listing. UsedRVParts viewing and pickup in Kelowna are by appointment.
Sewer-hose support length describes the supported hose run, not necessarily one unbroken length of support. Follow proper drainage and sanitation procedures.
Match a Camco sewer-hose support
Check the individual listing for its condition, photos and included sections or carrying hardware.
Compare more RV campsite parts
Our Valterra Slunky and EasySlider support comparison covers other brands and configurations. For the leveling setup, see Camco stabilizer jack pad identification.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits