Camco jack pads can look similar when stacked, yet their materials and support surfaces differ. Compare the original number, pad dimensions and mounting style before replacing a missing pad or completing a set. Removable ground pads are different from steel feet made for a specific stabilizer design.

Recognize ground pads versus steel feet

Polypropylene ground pads

The yellow Camco 44541 and 44543 are larger stabilizer support pads, while 44595 is a compact 6.2-inch-square set. Confirm jack-foot contact and the package supplied.

Recycled-rubber pads

Camco 44591 uses compact black 6.2-inch-square recycled rubber pads. Other rubber pad sizes exist, but confirm the exact product and size before substituting.

Steel stabilizer feet

Camco 57883 is a steel 7-5/16-inch-diameter pad intended for specified cross-frame or T-type stabilizing jacks. It should not be treated as a loose universal ground mat.

Fit the stabilizer, not just the ground

Check the jack's foot geometry, supported load, mounting method and intended ground contact. Do not use a pad's standalone rating to increase the jack's rated capacity.

Camco jack pad identification chart

Camco MPN Construction Listed size Package Intended type
44541 Polypropylene 14 × 11.7 in Verify listing contents Large stabilizer pad set
44543 Polypropylene 14 × 11.7 in 2-pack Large yellow support pads
44595 Polypropylene 6.2 × 6.2 in 4-pack Compact yellow support pads
44591 Recycled rubber 6.2 × 6.2 in 4-pack Compact black support pads
57883 Steel 7-5/16 in diameter 4-pack T-type stabilizer foot pad
Load and fit: A stabilizer pad's size or advertised capacity does not raise the rating of the jack, vehicle or underlying ground. Verify the correct support method for your equipment.

Inspect the original pad before reuse

  1. Measure the pad's working surface and identify polypropylene, recycled rubber or steel construction.
  2. For plastic and rubber pads, check for cracking, severe deformation, brittle sections and uneven contact surfaces.
  3. For steel 57883, verify the original stabilizer model and inspect the mounting points, corrosion and damage.
  4. Count the pieces. The original retail package can contain more parts than an individual loose item.
  5. Check the specific UsedRVParts listing for condition and included components. Viewing and pickup in Kelowna are by appointment.

Match the original Camco part

View the individual catalog entry for item condition, photographs and contents.

For a different part of the RV setup, compare Camco Sidewinder and Rhino sewer-hose supports. These products keep waste hoses positioned for drainage, rather than supporting jack feet.

Récemment consulté

Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement

Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.

Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.

Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.

Nos produits

Bulletin d'information sur les pièces de camping-car

Inscrivez-vous pour les promotions à venir !