A toilet that leaks or fails to deliver flush water may need a water-valve module, but Thetford uses different components across Aqua-Magic and Tecma toilets. Aqua-Magic mechanical water modules are not replacements for electrically actuated Tecma solenoid valves. Identify the toilet model and flush system before choosing a part.

Choose by toilet design, not by valve appearance

Aqua-Magic V and VI

Thetford 50037 is a replacement water module listed for Aqua-Magic V and VI models. Check the model-specific service drawing, the original valve arrangement and supplied hardware.

Style Plus / Style Lite

Thetford 50225 is a separate mechanical water module used with listed Style Plus and Style Lite toilets. The Style II and Residence series may require different parts, even though their pedestal-flush arrangement is similar.

Bravura

Thetford 50351 is a Bravura water-valve module. It is intended for that family rather than all Thetford permanent RV toilets.

Tecma electric-flush systems

Thetford 50242 is listed as a 24V solenoid for Tecma EasyFit Eco; Thetford 50252 is a separate 12V solenoid for Tecma Silence Plus. Match voltage, connector, plumbing fittings and exact model.

Mechanical flush valve versus electric solenoid

Freshwater supplyCorrect inlet pressure and connectionModel-specific valveMechanical pedal module or electric solenoidBowl rinseDelivers water when the approved flush control operates

Original component relationship, not an installation or plumbing schematic. A leaking toilet base or failed waste-ball seal can be a different problem from a leaking inlet valve.

Thetford valve replacement part numbers

Exact MPN Component Listed application Operation
Thetford 50037 Water-valve module Aqua-Magic V / VI Mechanical flush valve
Thetford 50225 Water-valve module Aqua-Magic Style Plus / Style Lite Mechanical flush valve
Thetford 50351 Water-valve module Aqua-Magic Bravura Mechanical flush valve
Thetford 50242 24V electrical solenoid Tecma EasyFit Eco Electric flush-water control
Thetford 50252 12V electrical solenoid Tecma Silence Plus Electric flush-water control
Electrical supply is critical: A 12V Tecma solenoid is not interchangeable with a 24V solenoid. Do not substitute Thetford 50252 for Thetford 50242 because both are electrically operated flush-water valves. A matching fitting alone does not establish compatibility.

What's included with the module?

The Thetford 50037 product record lists the replacement water valve, flange seal and installation hardware, while the listings for Thetford 50225 and Thetford 50351 identify included mounting hardware. Confirm the exact manufacturer's packaged contents for the current item before ordering. The Thetford 50242 listing indicates a wall switch and wiring harness, while the Thetford 50252 listing explicitly excludes those accessories; do not assume every solenoid package contains the same components.

How to diagnose a water leak

If water appears at the freshwater inlet or continues to trickle into the bowl with the flushing control released, check the valve and supply plumbing according to the applicable toilet service instructions. If the toilet bowl will not hold water, the flush blade or waste-ball seal may instead be the issue. If wastewater is leaking around the floor flange, inspect the toilet-to-floor seal rather than automatically replacing the inlet valve.

Shut off freshwater pressure and isolate any 12V/24V power before working on the toilet. A Tecma system may have electronic timing controls, separate pump parts and specific procedures for draining or servicing. Follow the exact model's manufacturer's instructions.

Shop exact Thetford water valve modules

Each card links to the matching UsedRVParts product with the assigned catalog image. Verify your original part number and included contents, especially for electrical solenoid kits.

Mechanical Aqua-Magic water modules

Tecma electrically operated solenoids

Frequently asked questions

Will 50037 replace the valve on any Thetford toilet?

No. The listing identifies Aqua-Magic V and VI applications. Other families use separately specified modules.

Is 50225 suitable for Aqua-Magic Style II?

Do not assume it is. The product record specifies Style Plus and Style Lite, not every toilet with Style in its name.

Can a 24V Tecma solenoid replace a 12V one?

No. The electrical voltage, connector, control system and specific water-valve design must all match.

Does a bowl that loses water always need an inlet valve?

No. Water draining from the bowl can indicate a faulty flush blade/waste-ball seal rather than the fresh-water valve.

Related toilet parts and seals diagrams

Use Thetford's support and parts information to confirm the exact original item and kit contents. Eligible used items may be viewed and collected by appointment in Kelowna.

Quick product links: Thetford 50037 · Thetford 50225 · Thetford 50351 · Thetford 50242 · Thetford 50252

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!