CC-255 trailer-tongue cargo tray
View CC-255 trailer-tongue cargo trayStromberg CC-255 Trailer Tray: Mounting Parts Diagram & Hardware
The Stromberg Carlson CC-255 Trailer Tray mounts above the A-frame of a compatible travel trailer. It carries up to 300 lb of secured cargo, subject to the trailer's own frame, tongue-weight and towing limits. The factory diagram labels the tray, support tubes and brackets as Figures A–I, with hardware identified separately as Figures J–O.
Open the official CC-255 illustrated assembly and parts diagram (PDF). The drawings show exactly where the numbered components fit on the trailer tongue.
CC-255 tray and mounting component numbers
| Factory figure | Original part number | Quantity in complete assembly | Component |
|---|---|---|---|
| A | 7605-101P | 1 | Perforated top tray |
| B | 7605-107P | 2 | Curved vertical C-channel support tubes |
| C | 7605-115 | 1 | Upper support mount |
| D | 7605-120 | 1 | Lower support mount |
| E | 7605-106P | 2 | Upper pockets that engage the support tubes |
| F | 7605-104P | 2 | Lower frame-mounted pockets |
| G | 7605-117 | 4 | Backer plates for the lower frame pockets |
| H | 7605-118 | 1 | Lower mount plate |
| I | 7605-102P | 2 | Mounting plates joining the tray to upper pockets |
A + I + E: upper assembly
The perforated tray is joined to two side plates and the upper mounting pockets.
B: vertical supports
Two curved support tubes connect the upper pockets to the lower mounting pockets.
F + G: frame pockets
Lower pockets and backer plates clamp to opposite sides of suitable A-frame members.
C + D + H: centre support
Upper and lower mounts provide support between the tray and trailer-frame area.
Original component-position overview; use the official factory drawing for exact assembly orientation and fastener placement.
Figures J–O: complete assembly hardware
The maker identifies 2155 as the replacement nut-and-bolt hardware assortment for these figures. These are the original complete-assembly hardware quantities; the parts list does not indicate that the separate 2155 kit includes the entire tray or support structure.
| Figure | Hardware description | Quantity | Factory assembly role |
|---|---|---|---|
| J | 5/16 × 8 in | 2 | Lower mount fastening |
| K | 5/16 × 4 in | 8 | Lower frame-pocket fastening |
| L | 5/16 × 1 in | 12 | Tray, upper pockets and upper support brackets |
| M | 3/8 × ¾ in | 6 | Tray-side mounting plates |
| N | 3/8 × 2¾ in | 4 | Support tube and pocket fastening |
| O | 3/8 × 1 in | 4 | Support-tube set screws |
Tray dimensions and trailer fit
The 2023 manufacturer drawing shows a tray approximately 32 inches across its broad edge, 19½ inches deep overall, and 24½ inches across its narrower end, with angled side sections. This is not a plain rectangular tray. The installation can accommodate many A-frames roughly 14–55 inches wide, but the tray's position, frame profile, existing propane equipment and tow-vehicle turning clearance determine whether a particular trailer is suitable.
The CC-255 hardware brackets fasten to appropriate trailer frame members. Before drilling, the maker directs installers to check for wiring, batteries, propane equipment, equalizer brackets and other obstructions. Cargo must be secured using suitable tie-down points, and tongue weight must remain within the trailer and tow vehicle limits.
Matching complete product and optional enclosure
View CC-255 trailer-tongue cargo trayCC-220 Gen Secure II storage enclosure
View CC-220 Gen Secure II storage enclosureThe CC-220 Gen Secure II enclosure is a separate product that mounts to an installed CC-255 tray. It is not supplied as part of the standard tray assembly. See the CC-220 enclosure parts guide for its own panel and fastener numbers.
Before purchasing or installing
- Measure the A-frame members, trailer-body clearance and available turning space. Confirm that the trailer's structure and tongue-weight limits can support the loaded tray.
- Identify which parts are missing from the original assembly by the factory A–O diagram before ordering individual replacements.
- Check the access requirements for propane cylinders and their valves, and preserve safe access to the tongue jack.
- Follow the manufacturer's two-person installation, drilling, fastening and cargo tie-down procedures. Verify all hardware is secured before travel.
Manufacturer diagrams and replacements
CC-255 installation manual with labeled assembly drawing; Stromberg's original CC-255 replacement part-number list; manufacturer tray specifications.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos