CC-220 Gen Secure II storage enclosure
View CC-220 Gen Secure II storage enclosureStromberg CC-220 Gen Secure II: Enclosure Parts & Assembly
The Stromberg Carlson CC-220 Gen Secure II is an aluminum storage enclosure designed specifically for installation on the CC-255 Trailer Tray. The enclosure ships for assembly, with separate panels, a hinged top, tie-down brackets, reinforcement braces, draw latch and gas shocks. It is not a stand-alone cargo tray or a generic bolt-on generator cover.
Open the Gen Secure II illustrated parts and assembly manual (PDF). The first page contains the manufacturer's labeled component drawing and the separate hardware-kit identifiers.
Find the CC-220 component by drawing number
| Drawing # | Manufacturer component number | Component name | Quantity |
|---|---|---|---|
| 1 | 8603-LP | Lock plate | 1 |
| 2 | 8603-DS | Driver-side tray extension channel | 1 |
| 3 | 8603-PS | Passenger-side tray extension channel | 1 |
| 4–5 | 8603-TDB | Internal tie-down brackets | 2 |
| 6 | 8603-RSPP | Passenger-side rear panel | 1 |
| 7 | 8603-RSPD | Driver-side rear panel | 1 |
| 8 | 8603-RC | Rear cover | 1 |
| 9 | 8603-HT | Hinged top / lid | 1 |
| 10 | 8603-DSP | Driver-side panel | 1 |
| 11 | 8603-TBD | Driver-side triangular reinforcement | 1 |
| 12 | 8603-PSP | Passenger-side panel | 1 |
| 13 | 8603-TBP | Passenger-side triangular reinforcement | 1 |
| 14 | 8603-CB | Front corner braces | 2 |
| 15 | 8603-FP | Front panel | 1 |
Base: CC-255 platform
The enclosure attaches to the existing perforated Trailer Tray using its extension channels and tie-down brackets.
Rear housing: #6–8
Rear side panels and rear cover form the back of the enclosure.
Lid assembly: #9–13
The hinged top and side panels use triangular braces and two gas shocks for opening support.
Front closure: #1, #14–15
The front panel, corner braces and latch engage the front lock plate.
Simplified component relationship. The factory's numbered diagram controls the actual panel orientation and fastening order.
Which hardware kit belongs to each step?
| Factory kit | Used during assembly | Typical hardware or accessory |
|---|---|---|
| 1CC220-A | Tray extensions and tie-down brackets | 3/8-16 bolts and matching locknuts |
| 1CC220-B | Latch plate assembly | Latch plate-section hardware |
| 1CC220-C | Rear panels and cover | 1/4-20 bolts and locknuts |
| 1CC220-D | Rear-panel connection to tray extensions | 3/8-16 bolts and matching locknuts |
| 1CC220-E | Hinged lid to rear cover | #10-24 pan-head screws and locknuts |
| 1CC220-F | Side and front bracing, gas shocks | Fasteners, four ball studs and two gas shocks |
| 1CC220-G | Draw latch | Pan-head screws, locknuts and latch handle portion |
| 1CC220-H | Lower edge sealing | Self-adhesive edge trim |
The manufacturer's parts list specifies two gas shocks, 8603-177, plus four ball studs, 8603-080, in the 1CC220-F hardware group. Refer to the exact installation diagram when replacing a shock or bracket. Individual OEM identifiers above do not imply that each item is sold separately on UsedRVParts.
Product photographs and matching equipment
View CC-220 Gen Secure II storage enclosureCC-255 trailer-tongue cargo tray
View CC-255 trailer-tongue cargo trayImportant distinctions before buying
The CC-220 enclosure requires an installed CC-255 tray and must not be mounted directly to an unsupported trailer tongue. Stromberg describes diamond-plate aluminum panels, interior tie-down locations, a latching lid and a locking plate (padlock not included). The manufacturer illustrates storage for certain portable generators, including the Onan P4500i, and some propane-cylinder arrangements; the exact equipment dimensions, ventilation needs, loading and clearances must be checked.
CC-200 and CC-220 are different enclosure generations. Stromberg explicitly identifies the parts advertised for the older CC-200 as unsuitable for the CC-220. Select replacement panels and hardware from the CC-220's own 8603-series and 1CC220-series component list.
Generator ventilation and installation
Stromberg instructs users to keep the CC-220 lid open when a generator is operating and never block the drainage/ventilation holes in the CC-255 tray. Operate any generator outdoors with adequate exhaust clearance, follow the generator manufacturer's ventilation and carbon-monoxide instructions, and avoid running an engine or generator in an enclosed space.
- Confirm the CC-255 tray is installed correctly, its mounting hardware is sound and its available capacity allows the enclosure plus cargo.
- Lay out the numbered panels and separate hardware kits before assembly, and protect hands at panel edges and hinged areas.
- Use the official assembly sequence for the side channels, rear panels, hinged lid, gas shocks, front panels and seals.
- Check lid operation, latch engagement, propane access, weight distribution and tow-vehicle turning clearance before travelling.
Factory references
CC-220 official panel diagram and hardware guide; Stromberg's Gen Secure II model specifications; manufacturer note on older CC-200 repair parts.
Need the underlying rack hardware instead? See the CC-255 tray assembly guide for the A–O tray callouts.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos