Choosing marine hose involves more than matching the inside diameter. Sierra's Shields hose range includes lightweight corrugated Bilgeflex for bilge discharge, helix-reinforced Multiflex for drains and fills, and heavy-duty Vac hose for more demanding marine service. Use the exact part number and the proposed connection location to select a suitable hose, not only the colour or nominal size.

What differs between Shields 120, 141 and 146?

120 BilgeflexA single-layer corrugated high-density polyethylene hose for appropriate bilge-pump discharge routing. It has clamping cuffs along the coil. Do not use it for below-waterline through-hull connections.
141 MultiflexFlexible clear PVC with a reinforcing black vinyl helix. Used for listed bilge discharge, potable-water tank filling and drains. It is not approved as a general below-waterline through-hull hose.
146 VacExtra-heavy-duty PVC with a white reinforcing helix. Shields identifies full-vacuum capability and applications that include bilge intake and discharge, drains and appropriate below-waterline service. Check installation-specific approvals.
Important hose safety: Do not assume Bilgeflex or Multiflex can replace hose connected to a through-hull below the waterline. Shields specifies application restrictions for the lighter 120 and 141 families. For any below-waterline connection, confirm the hose, seacock, fitting and clamps meet the boat manufacturer's requirements and applicable marine standards.

Sierra hose family, diameter and coil-length chart

Inside diameter, length and construction are tied to the exact manufacturer MPN. A hose of the same diameter may be designed for a different operating pressure, vacuum condition or mounting location.

MPN Series Inside diameter Coil length Material / design Product
16-120-0346B 120 Bilgeflex 3/4 in ID 50 ft Corrugated polyethylene View
161201182B 120 Bilgeflex 1-1/8 in ID 9 ft Corrugated polyethylene View
16-141-0346B 141 Multiflex 3/4 in ID 50 ft Clear PVC, black vinyl helix View
16-141-1186B 141 Multiflex 1-1/8 in ID 50 ft Clear PVC, black vinyl helix View
161411126B 141 Multiflex 1-1/2 in ID 50 ft Clear PVC, black vinyl helix View
61412000BS 141 Multiflex 2 in ID 100 ft Clear PVC, black vinyl helix View
16-146-0340S 146 Vac 3/4 in ID 100 ft Heavy-duty clear PVC, white vinyl helix View
16-146-1000S 146 Vac 1 in ID 100 ft Heavy-duty clear PVC, white vinyl helix View
16-146-2000S 146 Vac 2 in ID 100 ft Heavy-duty clear PVC, white vinyl helix View

Compare the Sierra Shields hoses

Product cards below link directly to the exact UsedRVParts listings. Confirm the hose diameter and material as well as the required connection rating before ordering.

Bilgeflex 120 — corrugated bilge-discharge hose

Multiflex 141 — reinforced flexible hose

Vac 146 — extra-heavy-duty marine hose

Marine hose selection questions

Are Bilgeflex 120 and Multiflex 141 the same?

No. Bilgeflex 120 is corrugated polyethylene made primarily for bilge discharge. Multiflex 141 is reinforced PVC with a black helix and a broader list of permitted fill and drain applications. Always check the exact product and location.

Can I use a corrugated bilge hose on an underwater hull fitting?

Not merely because it fits the hose barb. Shields excludes Bilgeflex and Multiflex from specified below-waterline through-hull service. Use only hose and hardware approved for the vessel's particular installation.

Is a two-inch Vac hose the same as a two-inch Multiflex hose?

No. Both have nominal two-inch inside diameters, but the 146-series Vac hose is a different heavy-duty, full-vacuum-rated construction from 141 Multiflex.

Does the hose diameter have to match the bilge pump's outlet?

Yes, the system must be sized according to the pump and installation instructions. Avoid constricting a discharge line or assuming a different hose diameter will preserve the manufacturer's rated pump flow.

Can any of these hoses be used with glycol antifreeze?

Do not assume so. Shields identifies chemical and antifreeze restrictions for some hose families. Check the exact model's chemical-compatibility guidance before using any antifreeze or cleaning agent.

For pumps requiring different hose discharge diameters, see Albin cartridge and low-profile bilge pump selection and Rule bilge pump model comparison.

Follow the hose manufacturer's current technical documentation for pressure, temperature, chemical resistance and below-waterline applications.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!