A rope-to-chain anchor rode joins nylon rope to chain in a way designed to feed through a compatible rope-chain windlass. Lewmar offers different rope lengths and diameters in its anchor rode range, so the number on the original product is more reliable than choosing a replacement by appearance. The four listings below have verified store part numbers and stated rope dimensions; final windlass compatibility must also account for the specific gypsy and chain.

Check the complete anchor system

Rope diameterThree listed MPNs have half-inch nylon rope; 69000339 is listed with nine-sixteenths-inch rope. Verify rope size against the actual windlass gypsy and manufacturer's approved range.
Rode lengthListed rope lengths range from 100 to 200 feet. Compare the original setup, maximum anchoring depth, required scope and available locker space; length alone is not a boat-size rating.
Chain and gypsyThe windlass needs the correct chain pitch, diameter, rope construction and splice profile. A product's rope diameter cannot establish the chain size or the exact windlass it will fit.
Important compatibility check: Do not choose a rope-to-chain rode solely because a product description says it is designed for Lewmar windlasses. Exact gypsy versions can differ by windlass, year and chain standard. Inspect the existing gypsy part number, approved rope size, chain specification and chain-to-rope splice before ordering.

Lewmar anchor rode part-number and rope-size chart

The table reproduces only the rope dimensions established by the individual store listings. Chain diameter, number of chain feet and exact compatible windlass are deliberately not assigned here without matching manufacturer evidence for each part number.

MPN Rope diameter Listed length Construction Product
69000331 1/2 in 100 ft Rope-to-chain splice View
69000332 1/2 in 150 ft Rope-to-chain splice View
69000334 1/2 in 200 ft Rope-to-chain splice View
69000339 9/16 in 200 ft Rope-to-chain splice View

Compare exact Lewmar anchor rodes

Use the individual product images and manufacturer part numbers to identify the appropriate listing. Confirm the exact package contents and the complete rope-to-chain specification before planning a windlass installation.

Anchor rode selection questions

Can any half-inch rope rode fit every Lewmar windlass?

No. The windlass's fitted gypsy must accept the exact rope size, chain pitch and splice profile. A common rope diameter alone does not confirm compatibility.

Is 69000339 interchangeable with 69000334?

Not automatically. Both product listings state a 200-foot length, but 69000339 is listed with nine-sixteenths-inch rope while 69000334 has half-inch rope. Compare the windlass and anchor-system specifications.

Does a longer anchor rode automatically improve holding?

Appropriate rode scope is important, but holding also depends on the anchor, seabed and conditions. The complete anchoring system must suit the vessel and operating environment.

Does a listed rope length tell me the chain length?

No. The listings identify rope dimensions. Chain length and chain diameter should be verified from the exact product's technical documentation rather than inferred from the rope length.

Use Lewmar's technical data and installation instructions for the windlass and gypsy installed on your boat. Inspect the rode, splice and shackle before anchoring.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!