A missing oval trailer light can be difficult to replace when the old lens has no readable part number. Begin with how it was mounted: recessed rubber grommet, surface flange, or recessed flange. Then compare the connector and function. Six-inch oval is a common shape, not a guarantee of fit.

Find the correct mounting arrangement

Recessed grommet

Rubber surround holds the light in a shaped panel opening. Check the PL-3 plug and grommet.

Surface flange

The lamp's exterior flange fastens onto the body panel. Some styles are hardwired.

Recessed flange

A flange is visible outside, while the body of the light sits inside the panel opening.

These are simplified mounting illustrations, not scale drawings or cutout templates.

Optronics specifies a 6.85 × 2.50-inch rounded opening for its A70GB grommet, with 1.25-inch corner radius. Do not use that measurement for a surface-flange lamp. Verify the existing panel and grommet first.

Check these details on your original light

  1. Measure the mounting opening, visible lens and available depth separately.
  2. Identify a three-pin PL-3 connection, hardwired leads, or separate backup-light circuit.
  3. Confirm whether the part is a rear stop/turn/tail lamp, amber side marker/turn lamp or combination reverse light.
  4. Determine whether you need one lamp, a paired kit with mounting hardware or only reflector trim.
  5. Compare the exact product number before changing mounting systems.
Do not choose by oval shape alone. The amber STL75AB serves as a side marker/turn lamp. STL1211RCFHPGP includes backup lighting. A78RXBP is a red reflector ring only, not an electrical lamp.

Optronics six-inch oval parts comparison

Part number Mount Lighting function Connection
ST70RBP Recessed grommet Red incandescent stop/turn/tail light Three-pin PL-3
TLL12RK Recessed grommet Pair of red six-LED stop/turn/tail lights PL-3 pigtails
STL75AB Recessed grommet Amber nine-LED mid-ship side turn/marker Three-pin PL-3
STL73RK Surface flange Red six-LED stop/turn/tail light with chrome trim Hardwired
STL1211RCFHPGP Surface flange Clear-lens stop/turn/tail/backup light Two female PL-3 plugs
STL111RFB Recessed flange Red GloLight stop/turn/tail lamp Three-pin PL-3
A78RXBP Reflex trim only Red reflector trim ring No wires or light source

Matching the original housing and connector is more reliable than comparing only its nominal length.

Compare actual part photographs and listings

Use these exact product links to review condition, current availability and any additional specifications.

Recessed grommet

Look for rubber around the light and a panel opening behind it.

Surface flange

A low-profile lamp attaches over the outer panel without a recessed lamp-sized cutout.

Recessed flange

A visible rim surrounds a body that still enters an opening behind the panel.

Reflex trim only

A separate reflector ring may snap onto a compatible flange but contains no light source.

UsedRVParts product viewing and pickup in Kelowna are by appointment. Check individual listings for their condition and availability.

Visto recientemente

Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia

Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.

Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.

Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.

Nuestros productos

Boletín informativo de piezas para vehículos recreativos

¡Regístrate para próximas promociones!