A missing or damaged rear lamp can be hard to identify when the red lens looks the same on both sides. Begin with the mounting base, any license-plate bracket, and the original part number. Below are Optronics RV tail-light assemblies, matching replacement covers and two-light kits carried in this store, grouped to avoid confusing one part with another.
Recognize the correct Optronics RV tail-light side
The lower bracket and license illumination are the key visible signs of the 61-series driver-side version. On the 60-series passenger side the assembly is shorter overall. Check the old housing before choosing a lens.
Simplified identification shapes; not manufacturer scale drawings or drilling templates. Dimensions refer to complete lamp assemblies unless specified.
A driver-side assembly can measure about 5 inches tall because of its license bracket; that does not mean its lens is taller than the passenger lens. Match AST60BP or AST61BP by the confirmed model and side.
Which complete light, lens or kit do you need?
| Optronics part | Side | Base or shape | Type | Light source / quantity |
|---|---|---|---|---|
| RVSTL60S | Passenger | White base | Passenger-side assembly | 9 LEDs |
| RVSTL61S | Driver | White base | Driver-side assembly | 12 LEDs |
| RVSTLB60FS | Passenger | Black base | Passenger-side assembly | 9 LEDs |
| RVSTLB61FS | Driver | Black base | Driver-side assembly | 12 LEDs |
| AST60BP | Passenger | Red acrylic, snap-in | Passenger-side replacement lens | Lens only |
| AST61BP | Driver | Red acrylic, snap-in | Driver-side replacement lens | Lens only |
| RVSTL0060RFK | Both (kit) | White bases | Two-light rectangular set | 2 lamps |
| RVSTL20K | Both (kit) | Oblong, low-profile | Two-light oblong set | 2 lamps |
Part numbers identify the products. Similar appearance or dimensions alone do not establish interchangeability.
Identify the correct repair before buying parts
- Check the back of the old lamp for an Optronics model number and note whether the base is white or black.
- Look below the red lens: the 61-series driver-side assembly has a plate bracket and license light; the 60-series passenger lamp does not.
- Inspect what is damaged. A broken lens may need only AST60BP or AST61BP; a failed LED assembly or housing requires a different part.
- Compare the new lamp's dimensions and wire colours with the original installation. An oblong RVSTL20 kit is not a direct shape match for a rectangular RVSTL60 lamp.
Compare actual catalog photos and individual parts
Use each image and manufacturer number to check the part against your existing lamp. Consult each product page for current availability and stated condition.
Compare individual 60/61-series assemblies
The same red-lens design is sold in passenger and driver configurations, with either white or black bases. The model number matters.
Lens-only replacements for matching 60/61 lamps
Compare the lens number to the lamp family. AST60BP is the passenger-side snap-in cover; AST61BP is driver-side. Both are supplied as replacement lenses without electrical components. Do not use an overall lamp height measurement—including a license bracket—to choose a lens.
Check paired tail-light kits as separate designs
A kit represents two tail-light assemblies rather than a single lens. RVSTL0060RFK includes a rectangular passenger and driver pair with white bases; RVSTL20K provides an oblong pair with different wiring colour conventions. Check both lights and the installation before changing families.
For detailed dimensions and the manufacturer’s current series information, consult Optronics RVSTL60/61 specifications and Optronics RVSTL20/21 specifications.
See each UsedRVParts listing for its condition and availability. Viewing and pickup are by appointment in Kelowna.