Camco Battery Trays 55394 & 55404 vs Replacement Strap 55364
Camco RV Battery Trays and Replacement Box Straps
A battery tray and a covered battery box solve different installation needs. Camco has dedicated single-battery trays for different group sizes, plus replacement strap hardware for supported battery boxes. Use the part numbers below to choose the right component for your existing installation.
Camco part-number comparison
| Camco MPN | Component | Intended selection | See product |
|---|---|---|---|
| 55394 | Group 24/24M Battery Tray | One Group 24 or 24M battery | View 55394 |
| 55404 | Group 27/30/31 Battery Tray | One Group 27, 30 or 31 battery | View 55404 |
| 55364 | Replacement Battery Box Strap | 39-inch woven polypropylene strap; check attachment hardware and existing box | View 55364 |
Tray versus box: A tray supports and helps retain the battery but does not provide the full enclosure of a covered battery box. Choose the required protection and ventilation arrangement for the vehicle, battery chemistry and installation location.
Check these details before choosing
- Battery group and actual dimensions: Camco 55394 is a Group 24/24M tray; 55404 accommodates a Group 27, 30 or 31 battery. Check the actual battery case, terminals, and required space before ordering.
- Existing restraint and mounting: Compare the mounting points, hold-down hardware and installation location with the new tray or strap. Inspect the condition of the supporting surface.
- Strap length and fastening arrangement: The 55364 replacement is a black woven polypropylene strap approximately 39 inches long and 1½ inches wide, supplied with attachment hardware. Verify it suits the battery box and original restraint method; it is not a universal tray restraint.
- Ventilation and terminal protection: A tray does not replace a vented enclosure where one is required. Follow the battery and RV or boat manufacturer's requirements for ventilation, cable strain relief, short-circuit protection and secure mounting.
Exact Camco parts and product photos
55364 — Replacement Battery Box Strap
39-inch woven polypropylene strap; check attachment hardware and existing box.
View matching partFrequently asked questions
Can I use a Group 24 tray for a Group 27 battery?
Do not assume so. These Camco tray part numbers distinguish the battery groups they accommodate. Match the battery case and the actual mounting space to the appropriate tray.
Does a battery tray provide the same protection as a covered battery box?
No. A tray provides a mounting platform and battery restraint arrangement. Covered and externally vented boxes serve additional purposes; use the installation type required for your application.
Is 55364 compatible with every Camco battery tray?
Not automatically. It is a replacement battery-box strap. Confirm the attachment arrangement and required restraint rather than assuming all trays and boxes use the same hardware.
Related battery storage reference
Compare enclosed models in our Camco battery box guide for Group 24, Group 27/30/31 and dual-battery installations.
Secure batteries against movement and accidental terminal contact. Disconnect power during installation and follow the battery manufacturer's safety and ventilation requirements.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos