Attwood 11180-5 · 3½–5½ ft
Compact reach for docking and retrieving lines from closer positions. Aluminum shaft; adjustable locking collar.
View product and conditionAttwood Telescoping Boat Hooks: Length & Locking Guide
A boat hook is handy for retrieving a dock line, reaching a mooring point or keeping a small gap from a dock during low-speed manoeuvres. Attwood makes telescoping hooks with different working reach, collapsed storage length and locking arrangements. Compare these measurements before choosing the longest model.
Choose a boat hook by reach and storage space
Shorter storage and close work11180-5 adjusts from 3½ to 5½ feet. Its compact range can suit boats where a long pole is awkward to store or use around railings.
Mid-length telescoping hook55190 is Attwood's heavy-duty two-section model. It extends from 4 to 7½ feet using a cam-lock adjustment, rubber-vinyl grips and a composite hook head.
Maximum reach in this comparison55175 extends to 12 feet and uses three telescoping sections. The added reach helps in some docking situations but requires a suitable clear area for storage and handling.
Protect the boat's finishThe heavy-duty 55190 and 55175 feature non-marring polyethylene tips. Use a suitable grip and position the hook carefully rather than relying on a long pole to stop a moving boat.
Attwood model-number and length chart
| Attwood MPN | Collapsed length | Maximum length | Construction | Locking |
|---|---|---|---|---|
| 11180-5 | 3½ ft (42 in) | 5½ ft (66 in) | Compact telescoping design | Adjustable locking collar |
| 55190 | 48 in | 90 in | Two-section | Cam-lock adjustment collar |
| 55175 | 56 in (manufacturer dimension) | 144 in (12 ft) | Three-section | Cam-lock adjustment collar |
55175 length clarification: Attwood's technical drawing lists 56 inches collapsed and 144 inches extended. Some catalog titles round its short end to about 4½ feet. Use the 56-inch manufacturer dimension when determining whether the pole fits in a locker or compartment.
What to check before selecting a telescoping hook
- Measure the storage compartment: The closed length matters if the hook must fit under a seat, in a locker or alongside other marine equipment.
- Consider normal working reach: The 12-foot model offers more reach, but a shorter hook may be easier to control from a small boat.
- Check the locking mechanism: Confirm that the adjustment collar grips securely at the intended working length before use.
- Match the task: A docking hook is not a replacement for a properly rated towline, lifting device, rescue tool or mooring cleat.
- Inspect the head and pole: Check for bent tubes, damaged tips or slipping collars before working around another vessel or dock.
Common boat-hook questions
Is the longer 55175 always the better choice? No. Its three-section construction gives more reach but also more length to manage; consider handling, storage and the usual docking arrangement.
Does the 55190 fold down to the same length as 11180-5? No. The listed shorter ends are 48 inches for 55190 and 42 inches for 11180-5.
Can these hooks be used to lift a person or tow a boat? They are docking and retrieval accessories, not rated lifting or towing devices. Use suitable purpose-designed equipment for those tasks.
Compare the Attwood boat-hook listings
These separate listings show current availability, item condition and supplied components. Catalog imagery illustrates the model rather than establishing the condition of an individual unit.
Attwood 55190 · 4–7½ ft
Two sections with a marine composite head and non-marring polyethylene tips. 6061-T6 aluminum tube, composite head; cam-lock adjustment collar.
View product and condition
Attwood 55175 · About 4⅔–12 ft
Long three-section model for greater reach; allow for its longer collapsed storage length. 6061-T6 aluminum tube, composite head; cam-lock adjustment collar.
View product and conditionRelated marine hardware references
For other hook lengths and tips, compare our Sea-Dog boat hook identification guide. When choosing line attachment hardware for a dock, see Sea-Dog dock and boat cleats by material and mounting. These are distinct equipment families with different functions and attachment requirements.
Visto recientemente
Inventario de piezas para vehículos recreativos nuevo y actualizado: consulte con frecuencia
Siempre estamos agregando piezas de RV nuevas y usadas a nuestro inventario, así que asegúrese de volver a consultarlo periódicamente.
Si no ve la pieza que necesita hoy, es posible que aún la tengamos en stock: nuestra base de datos interna incluye miles de piezas de vehículos recreativos nuevas que aún no están publicadas en línea.
Envíenos un mensaje de texto o correo electrónico con el número de producto o modelo y verificaremos la disponibilidad de inmediato.
Nuestros productos