A01-2011VP — RV sink drain with strainer basket
Sink-drain assembly for a 1½-inch P-trap connection; the maker also specifies a ⅜-inch barbed drain adapter.
View A01-2011VP productValterra RV Sink & Shower Drains: A01-2011VP vs A01-2012VP
Two RV drains can both lead to a 1½-inch P-trap without fitting the same opening in a sink or shower pan. Valterra's A01-2011VP sink-drain assembly includes a strainer basket and a small barbed connection, while A01-2012VP is a shower drain with a defined stainless-steel flange and shower-pan opening size. Match the drain opening and the plumbing underneath before choosing a replacement.
Valterra RV sink and shower drain comparison
| Part number | Part type | Connection / opening | Distinguishing detail |
|---|---|---|---|
| A01-2011VP | Sink drain and strainer basket | 1½-inch P-trap | ⅜-inch barbed drain adapter; sink opening not specified on maker page |
| A01-2012VP | Shower drain | 1¾-inch drain opening; 1½-inch P-trap | 2½-inch stainless-steel flange |
Where the measurements apply
Sink drain — A01-2011VP
This assembly includes a strainer basket and is designed to connect to a 1½-inch P-trap. Valterra also identifies a ⅜-inch barbed drain adapter. Those numbers describe downstream plumbing connections, not a confirmed sink-cutout diameter. Compare your existing drain body and sink opening rather than assuming the 1½-inch trap size is the hole size.
Shower drain — A01-2012VP
The shower-drain flange is 2½ inches in diameter and seats over a 1¾-inch drain opening. The lower connection is designed for a 1½-inch P-trap. Check both measurements: the visible flange covers a larger area than the opening through the shower pan.
Find the matching parts
A01-2012VP — RV shower drain with stainless flange
2½-inch stainless-steel flange for a 1¾-inch drain opening and 1½-inch P-trap.
View A01-2012VP productBefore replacing an RV drain
- Measure the actual drain opening, not only the outer trim or visible flange.
- Confirm the trap size and connection arrangement beneath the sink or shower.
- For the sink assembly, determine whether the ⅜-inch barbed connection is needed in your existing plumbing layout.
- Check the new drain can be sealed and secured to your particular sink or pan; follow the installation instructions for the plumbing components involved.
For the manufacturer's original specifications, see Valterra A01-2011VP and Valterra A01-2012VP.
Récemment consulté
Inventaire de pièces détachées pour VR, nouveau et mis à jour – Consultez-le régulièrement
Nous ajoutons constamment des pièces neuves et d'occasion pour véhicules récréatifs à notre inventaire, alors assurez-vous de consulter régulièrement notre site.
Si vous ne trouvez pas la pièce dont vous avez besoin aujourd'hui, nous l'avons peut-être encore en stock : notre base de données interne comprend des milliers de pièces neuves pour véhicules de loisirs qui ne sont pas encore répertoriées en ligne.
Envoyez-nous un SMS ou un e-mail avec le numéro de produit ou le modèle , et nous vérifierons immédiatement sa disponibilité pour vous.
Nos produits